AC Power Switch
INTEGRATED CIRCUITS DIVISION
Characteristics
Parameter
AC Operating Voltage Load Current
With 5°C/W Heat Sink No Heat S...
Description
INTEGRATED CIRCUITS DIVISION
Characteristics
Parameter
AC Operating Voltage Load Current
With 5°C/W Heat Sink No Heat Sink On-State Voltage Drop Blocking Voltage Thermal Resistance, Junction-to-Case, JC
Rating 20-240
20 5 1.1 800 0.35
Units Vrms
Arms VP (at IL=2AP)
VP °C/W
Features
Load Current up to 20Arms with 5°C/W Heat Sink 800VP Blocking Voltage 5mA Control Current Zero-Cross Switching Isolated, Low Thermal Impedance Ceramic Pad for
Heat Sink Applications 2500Vrms Isolation, Input to Output DC Control, AC Output Optically Isolated TTL and CMOS Compatible Low EMI and RFI Generation High Noise Immunity Machine Insertable, Wave Solderable
Applications
Programmable Control Process Control Power Control Panels Remote Switching Gas Pump Electronics Contactors Large Relays Solenoids Motors Heaters
Approvals
UL 508 Recognized Component: File E69938
CPC1998
AC Power Switch
Description
CPC1998J is an AC Solid State Switch utilizing dual power SCR outputs. This device also includes zero-cross turn-on circuitry and is specified with an 800VP blocking voltage.
Tightly controlled zero-cross circuitry ensures low noise switching of AC loads by minimizing the generation of transients. The optically coupled input and output circuits provide exceptional noise immunity and 2500Vrms of isolation between the control and the output. As a result, the CPC1998 is well suited for industrial environments where electromagnetic interference would...
Similar Datasheet