MITSUMI
Control of Lithium Ion Batteries (switching regulator secondary) (two cells) MM1357
Control of Lithium Ion Bat...
MITSUMI
Control of Lithium Ion Batteries (switching
regulator secondary) (two cells) MM1357
Control of Lithium Ion Batteries (switching
regulator secondary) (two cells)
Monolithic IC MM1357
Outline
This IC is used to control two-cell chargers and the secondary side of switching
regulators; it features enhanced functions for current switching and for overcharge detection and other kinds of protection. The control output is capable of driving a photocoupler LED. The charging current can be switched between high and low currents, and each can also be varied externally.
Features
1. Charging voltage 2. Charging current (switchable between high and low levels, variable)
3. Reference voltage
: Can be set externally High : 320mV typ. Low : 145mV typ. : 1.207V typ.
Package
SOP-14B
Applications
1. Switching
regulator 2. AC adapter 3. Lithium ion battery charger
MITSUMI
Control of Lithium Ion Batteries (switching
regulator secondary) (two cells) MM1357
Block Diagram
Pin Assignment
14 13 12 11 10 9 8 1234567
SIP-14B
1 OUT 8 CC OUT
2 CFB 9 S-GND
3 CSR 10 VFB+
4
CC IN
11
VCC
5
ADJ1
12 REG OUT
6
P-GND
13
VREF
7 ADJ2 14 VFB-
MITSUMI
Control of Lithium Ion Batteries (switching
regulator secondary) (two cells) MM1357
Pin Description
Pin no. Pin name Input/output
Function
1
OUT
Output
Output pin for charging control An external photocoupler is controlled for constant-current, constant-voltage charging control.
Amp inverting input pin for current control
2 CF...