BD2626
Dual Band 2-Way SMT Power Divider
2400~2900MHz WCDMA, WiBro & LTE
Device Features
Typical Isolation = 25.0 dB ...
BD2626
Dual Band 2-Way SMT Power Divider
2400~2900MHz WCDMA, WiBro & LTE
Device Features
Typical Isolation = 25.0 dB Typical Insertion Loss = 0.6 dB MSL 1 moisture rating Small Size and Low Profile Lead-free/RoHS-compliant SOT-26 Plastic Package
BD26XX(XX=Wafer number)
Product Description
BeRex’s Divider BD2626 is designed for WCDMA WiBro & LTE band with low Insertion Loss and Isolation. This chip is fully passivated for enhanced performance and reliability and packaged in RoHS-compliant with SOT-26 surface mount package.
Typical Performance1
Parameter
Min Typical Max Unit
Frequency Range
2400
2900 MHz
Insertion Loss
0.6 0.8 dB
Isolation
21.5 28.0
dB
IRL(S11)
-26.0 -29.0 dBm
ORL(S22/S33)
-23.0 -26.0 dBm
Amplitude Balance Phase Balance
0.1 0.15 dB 0.75 1.5 deg
*All specifications apply to the following test conditions,
1. Device performance _ measured on BeRex E/B at 25°C, 50ohm system.
2. Insertion Loss: Above 3.0dB.
Applications
Base station Infrastructure Commercial/Industrial/Military wireless system
Absolute Maximum Ratings
Parameter Input Power Storage Temperature Operating Temperature
Rating 1.5W CW dBm -55 to +155°C -40 to +85°C
Operation of this device above any of these parameters may result in permanent damage.
Evaluation Board Drawing
Function Block Diagram
Pins 2,4 and 6 must be DC and RF grounded.
BeRex
●website: www.berex.com
●email:
[email protected]
Specifications and information are subject to change and products m...