Multiplexer/demultiplexer switch
CBTL05023
Multiplexer/demultiplexer switch for Thunderbolt applications
Rev. 5 — 15 July 2013
Product data sheet
1. ...
Description
CBTL05023
Multiplexer/demultiplexer switch for Thunderbolt applications
Rev. 5 — 15 July 2013
Product data sheet
1. General description
The CBTL05023 is a multiplexer/demultiplexer switch chip for DisplayPort v1.2 signals and the control signals of a 10 Gbit/s channel. The 10 Gbit/s channel does not pass through this switch. This chip provides BIASOUT output control signal, and the DC-biasing pull-down resistors to facilitate an external 10 Gbit/s channel.
The AUX MUX is a 2 : 1 switch with CA_DETect pin selecting between AUX and DDC (Direct Display Control) signals.
The DP MUX is a 2 : 1 switch that selects between DPML (DisplayPort Main Link) and LSTX/LSRX signals.
This chip also includes three control signal buffers: HPDOUT, CA_DETOUT and BIASOUT.
CBTL05023 is powered by a 3.3 V supply and it is available in 3 mm 3 mm HVQFN24 package with 0.4 mm pitch.
2. Features and benefits
2.1 AUX MUX 2 : 1 switch
This 2 : 1 switch is controlled by CA_DET signal multiplexing of the 1 Mbit/s differential AUX and DDC (Direct Display Control) signals When CA_DET is HIGH, DDC path is selected
Differential AUX channel: Low insertion loss: 0.5 dB at 5 MHz Low return loss: 19 dB at 5 MHz Low ON-state resistance: 7.5 Bandwidth: 5 GHz Low off-state isolation: 75 dB at 5 MHz Low crosstalk: 40 dB at 5 MHz Common-mode input voltage VIC: 0 V to 3.3 V Differential input voltage VID: 1.4 V (maximum)
DDC channel has DDC_CLK and DDC_DAT I2C signals 100 kHz 3.3 V vo...
Similar Datasheet