Document
AAZZ762T
16 AMP HIGH INRUSH
MINIATURE POWER RELAY
FEATURES
• Dielectric strength 5000 Vrms • Low height: 15.7 mm • 16 Amp switching • Tungsten premake contact for extrem high inrush • Isolation spacing greater than 10 mm • Reinforced insulation, EN 60730-1 (VDE 0631, part 1)
EN 60335-1 (VDE 0700, part 1) • UL, CUR file E44211 • VDE certificate 40006031
CONTACTS
Arrangement SPST (1 Form A)
Ratings
Resistive load:
Max. switched power: 4000 VA Max. switched current: 16 A Max. inrush current: 165 A , 20 ms
800 A, 200 µs Max. switched voltage: 440 VAC
Rated Load UL, CUR
16 A at 277 VAC, general use, 10k cycles, 85°C 2.2 A at 277 VAC, standard ballast, 10k cycles, 50°C 3000 W at 230 VAC, tungsten, 12k cycles, 40°C 1200 W at 277 VAC, tungsten, 6k cycles, 50°C 1200 W at 120 VAC, tungsten, 6k cycles, 50°C TV-8 at 120 VAC, 25k cycles, 40°C
VDE Material Resistance
16 A at 250 VAC resistive, 30k cycles, 85°C Silver tin oxide + tungsten < 100 milliohms initially
COIL
Power At Pickup Voltage (typical)
196 mW (235 mW at 60 V and 110 V)
GENERAL DATA
Life Expectancy Mechanical Electrical
Operate Time (max)
Release Time (max)
Minimum operations 5 x 106 1 x 104
15 ms at nominal coil voltage
8ms at nominal coil voltage (with no coil suppression)
Dielectric Strength
5000 Vrms coil to contact
(at sea level for 1 min.) 1250 Vrms between open contacts
Insulation Resistance
1000 megaohms min. at 20°C 500 VDC 50% RH
Insulation (according to DIN VDE 0110, IEC 60664-1)
C250 Overvoltage category: III Pollution degree: 3 Nominal voltage: 250 VAC
Dropout Ambient Temperature
Operating Vibration Shock Enclosure Terminals Max. Solder Temp. Max. Solder Time Max. Solvent Temp. Max. Immersion Time Weight Packing unit in pcs.
Greater than 10% of nominal coil voltage At nominal coil voltage -40°C (-40°F) to 85°C (185°F) 0.062” (1.5 mm) DA at 10-55 Hz 10 g P.B.T. polyester tinned copper alloy, P.C. 270°C (518°F) 5 seconds 80°C (176°F) 30 seconds 13.5 grams 50 per tray / 500 per carton box
Max. Continuous Dissipation
Temperature Rise Temperature
0.9 W at 20°C (68°F) ambient
26°C (47°F) at nominal coil voltage Max. 130°C (266°F) Class B Max. 155°C (311°F) Class F
NOTES
1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice.
10/2/14
AZ762T
RELAY ORDERING DATA
Nominal Coil VDC
COIL SPECIFICATION - DC COIL
Must Operate VDC
Max. Continuous VDC
Coil Resistance Ohm
5 3.5 7.5 62 ±10%
6 4.2
9 90 ±10%
9 6.3 13.5 202 ±10%
12 8.4 18 360 ±10%
18 12.6
27 810 ±10%
24 16.8
36 1,440 ±10%
48 33.6
72 5,760 ±15%
60 42.0
90 7,500 ±15%
110 77.0 165 25,200 ±15%
* “1AE” denote silver tin oxide contacts with tungsten premake contact. Add suffix “E” at the end of the order number for sealed version. Add suffix “F” at the end of the order number for Class F insulation system.
ORDER NUMBER* 1 Form A
AZ762T-1AE-5D AZ762T-1AE-6D AZ762T-1AE-9D AZ762T-1AE-12D AZ762T-1AE-18D AZ762T-1AE-24D AZ762T-1AE-48D AZ762T-1AE-60D AZ762T-1AE-110D
MECHANICAL DATA
29 ± 0.3
12.7 ± 0.3
15.7 ± 0.3
3.6 ± 0.5
0.3 ± 0.2
4 x 0.5
2 x 0.5 x 0.5
4 x 0.8 7.56
5.04
20.16
2.6
Dimensions in mm. Tolerance: ± 0.25 mm
7.56 2.7
PC BOARD LAYOUT
5.04
20.16
2.6
6 x ø 1.3
Viewed toward terminals
WIRING DIAGRAM
1 Form A
54
2
87
1
Viewed toward terminals
10/2/14
.