Document
Low-Profile High Current Power Inductor
CDEP15D90/T150
Description Inductor for high withstand voltage (DC 120V) and large current Magnetically shielded Qualified AEC-Q200 Operating temperature range: - 40°C~+150°C
(including coil’s self temperature rise)
Applications LED Head light for Automobile ECU Automotive and other high temperature, high reliability application
Dimension - [mm]
Reference Land pattern - [mm]
15.5±0.5
10.0 Max.
(12.0)
16.5 11.4
2.1±0.2 2.4
2.5±0.2
6.5 12.7
(9.6)
15.5±0.5
2.5±0.2
Note: This specification is subject to change without notice. Please contact your nearest sales office for updated information when placing an order.
Page 1 of 4
Ver.1.0 2016.03.14
www.sumida.com
Low-Profile High Current Power Inductor
CDEP15D90/T150
Electrical Characteristics: Standard Types
Part No.
CDEP15D90T150NP-4R7MC-125 CDEP15D90T150NP-6R2MC-125 CDEP15D90T150NP-100MC-125 CDEP15D90T150NP-125MC-125 CDEP15D90T150NP-150MC-125 CDEP15D90T150NP-220MC-125
Inductance (μH) (±20%)
※1
4.70 6.20 10.0 12.5 15.0 22.0
D.C.R (mΩ) (±20%)
3.50 4.90 7.90 8.90 10.6 14.5
Electrical Characteristics: High Power Types
Part No.
CDEP15D90T150NP-4R7MC-100 CDEP15D90T150NP-6R2MC-100 CDEP15D90T150NP-100MC-100 CDEP15D90T150NP-125MC-100 CDEP15D90T150NP-150MC-100 CDEP15D90T150NP-220MC-100
Inductance (μH) (±20%)
※1
4.70 6.80 10.0 12.5 15.0 22.0
D.C.R (mΩ) (±20%)
4.90 5.50 8.90 10.6 13.4 20.1
Saturation Current (A) ※2
at 20℃ at 150℃
Temperature Rise current (A) ※3
17.0 14.8 12.0 10.2 9.60 7.70
11.8 10.4 8.40 7.60 6.70 5.30
16.5 14.8 12.5 12.2 8.50 7.50
Saturation Current (A) ※2
at 20℃ at 150℃
Temperature Rise current (A) ※3
19.2 16.3 13.0 12.0 10.7 8.80
13.3 11.0 9.30 8.20 7.70 6.00
14.8 13.5 12.2 8.50 8.00 6.50
※ 1 Measuring frequency at 100kHz 0.1V ※ 2 Saturation current: This indicates the actual value of D.C. current when the inductance becomes 30% lower than its
nominal value. ※ 3 Temperature rise current: The actual value of D.C. current when the temperature of coil becomes △T=40°C
(Ta=20°C). Please note that when using the product while applying current with audio-frequency (AF) signals may results in audible noises due to magnetostriction. Also, in order to avoid an audible noise problem, operating with non-AF signals would be recommended. The noise amplify depending on the coil mount area on the PCB.
Note: This specification is subject to change without notice. Please contact your nearest sales office for updated information when placing an order.
Page 2 of 4
Ver.1.0 2016.03.14
www.sumida.com
Low-Profile High Current Power Inductor
CDEP15D90/T150
CDEP15D90/T150NP-4R7MC-125
CDEP15D90/T150NP-6R2MC-125
CDEP15D90/T150NP-100MC-125
CDEP15D90/T150NP-125MC-125
CDEP15D90/T150NP-150MC-125
CDEP15D90/T150NP-220MC-125
Note: This specification is subject to change without notice. Please contact your nearest sales office for updated information when placing an order.
Page 3 of 4
Ver.1.0 2016.03.14
www.sumida.com
Low-Pr.