Quad Bidirectional Low-Voltage Logic-Level Translator
EVALUATION KIT AVAILABLE
MAX14611
Quad Bidirectional Low-Voltage Logic-Level Translator
General Description
The MAX14...
Description
EVALUATION KIT AVAILABLE
MAX14611
Quad Bidirectional Low-Voltage Logic-Level Translator
General Description
The MAX14611 is a quad bidirectional logic-level translator that provides the level shifting necessary to allow data transfer in a multivoltage system. Externally applied voltages, VCC and VL, set the logic levels on either side of the device. A low-voltage logic signal present on the VL side of the device appears as a high-voltage logic signal on the VCC side of the device, and vice-versa.
The device is ideal for I2C bus as well as MDIO bus applications where open-drain operation is often required. The device features a three-state output mode (TS). Drive TS high to connect the pullup to the powered I/O port. This allows for continuous, undisrupted I2C operation on the powered side of the device while the level translation function is off. The MAX14611 is a pin-to-pin compatible upgrade to the MAX3378E in the TDFN package.
The MAX14611 features enhanced high-electrostaticdischarge (ESD) protection on all I/OVCC_ ports up to ±6kV HBM. The device operates over the -40NC to +85NC extended temperature range and is available in 3mm x 3mm, 14-pin TDFN and 4.9mm x 5.1mm, 14-pin TSSOP packages.
Applications
SPI, I2C, and MDIO Level Translation
Low-Voltage ASIC Level Translation
Portable Electronics
Mobile Phones
POS Systems
Telecommunications Equipment
Benefits and Features
S Improved Interoperability Meets I2C Specifications 10kI Internal Pullup Resistor Pin-to-Pi...
Similar Datasheet