PI4IOE5V9522

||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| PI4IOE5V9522 4-bit I2C-bus and SMBus low power I/O port with interrupt and reset Features  Operation power supply voltage from 2.3V to 5.5V  4-bit I2C-bus GPIO with interrupt and reset  5V tolerant I/Os  Active Low interrupt output  Active Low reset input  Polarity inversion register  Low current consumption  0Hz to 1MHz clock frequency  Noise filter on SCL/SDA inputs  Power-on reset  ESD protection (4KV HBM and 1KV CDM)  Package offered:MSOP-10L Pin Configuration Description The PI4IOE5V9522 provides 4 bits of General Purpose parallel Input/Output (GPIO) expansion for I2C-bus/ SMBus applications. It includes the features such as higher driving capability, 5V tolerance, lower power supply, individual I/O configuration, and smaller packaging. It provides a simple solution when additional I/O is needed for ACPI power switches, sensors, push buttons, LEDs, fans, etc. The PI4IOE5V9522 consists of a 4-bit register to configure the I/Os as either inputs or outputs, and a 4bit polarity registers to change the polarity of the input port register data. The data for each input or output is kept in the corresponding Input port or Output port register. All registers can be read by the system master. The PI4IOE5V9522 open-drain interrupt output (INT) is activated when any input stat...