Document
MBR10200CT / MBRF10200CT
Green
10A SCHOTTKY BARRIER RECTIFIER
Product Summary
MBR10200CT / MBRF10200CT (Per Leg)
VRRM (V)
IO (A)
VF (MAX) (V) @ +25°C
200 5
0.91
IR (MAX) (mA) @ +25°C
0.1
Features and Benefits
• Guard Ring Die Construction for Transient Protection • High Surge Current Capability • Low Forward Voltage Drop • Lead-Free Finish; RoHS Compliant (Notes 1 & 2) • Halogen and Antimony Free. “Green” Device (Note 3) • Qualified to AEC-Q101 Standards for High Reliability
Description and Applications
This Schottky Barrier Rectifier is designed to meet the general requirements of commercial applications. It is ideally suited for use as a:
• Polarity Protection Diode • Re-Circulating Diode • Switching Diode
Mechanical Data
• Case: TO220AB, ITO-220AB • Case Material: Molded Plastic, “Green” Molding Compound.
UL Flammability Classification Rating 94V-0 • Moisture Sensitivity: Level 1 per J-STD-020 • Terminals: Finish - Matte Tin Annealed over Copper Leadframe.
Solderable per MIL-STD-202, Method 208 • Polarity: See Below • Weight: TO-220AB – 1.95 grams (Approximate)
ITO-220AB – 1.69 grams (Approximate)
TO-220AB Top View
TO-220AB Bottom View
ITO-220AB Top View
ITO-220AB Bottom View
Package Pin Out Configuration
Ordering Information (Notes 4)
Notes:
Part Number MBR10200CT-LJ MBRF10200CT-LJ
Case TO220AB (Type C) ITO-220AB (TO220F-3)
Packaging 50 pieces/tube 50 pieces/tube
1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied. 2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds. 4. For packaging details, go to our website at http://www.diodes.com/products/packages.html.
Marking Information
MBR10200CT = Product Type Marking Code AB = Foundry and Assembly Code YYWW = Date Code Marking YY = Last Two Digits of Year (ex: 13 = 2013) WW = Week (01 - 53)
MBRF10200CT = Product Type Marking Code AB = Foundry and Assembly Code YYWW = Date Code Marking YY = Last Two Digits of Year (ex: 13 = 2013) WW = Week (01 - 53)
MBR10200CT / MBRF10200CT
Document number: DS36512 Rev. 6 - 2
1 of 5 www.diodes.com
April 2015
© Diodes Incorporated
MBR10200CT / MBRF10200CT
Maximum Ratings (Per Leg) (@TA = +25°C, unless otherwise specified.)
Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%.
Characteristic
Symbol
Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage
Average Rectified Output Current
(Per Leg) (Total)
Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load
VRRM VRWM VRM
IO
IFSM
Value
200
5 10 110
Unit V
A A
Thermal Characteristics (Per Leg)
Characteristic Typical Thermal Resistance, Junction to Case (Note 5) Package = TO-220AB Package = ITO-220AB Typical Thermal Resistance, Junction to Ambient (Note 5) Package = TO-220AB Package = ITO-220AB Operating and Storage Temperature Range
Symbol RθJC
RθJA TJ, TSTG
Value
4 7
15 25 -55 to +175
Unit °C/W
°C/W °C
Electrical Characteristics (Per Leg) (@TA = +25°C, unless otherwise specified.)
Characteristic Forward Voltage Drop
Leakage Current (Note 6)
Symbol VF
IR
Min — —
— —
Typ 0.85 —
— —
Max 0.91 0.75
0.1 10
Unit V
mA
Test Condition
IF = 5A, TJ = +25°C IF = 5A, TJ = +125°C
VR = 200V, TJ = +25°C VR = 200V, TJ = +125°C
Notes:
5. Device mounted on heat sink (45mm x 20mm x 12mm), with minimum recommended pad layout per http://www.diodes.com. 6. Short duration pulse test used to minimize self-heating effect.
MBR10200CT / MBRF10200CT
Document number: DS36512 Rev. 6 - 2
2 of 5 www.diodes.com
April 2015
© Diodes Incorporated
PD, POWER DISSIPATION (W)
10.0
TJ = 175°C
8.0
6.0
4.0
2.0
0.0 0
5 10 15
IF(AV) AVERAGE FORWARD CURRENT (A) Figure 1 Forward Power Dissipation
10 1
0.1 0.01
TA = 175°C TA = 150°C
TA = 125°C
TA = 85°C
0.001 0.0001
TA = 25°C
0.00001 0
50 100 150 200
VR, INSTANTANEOUS REVERSE VOLTAGE (V) Figure 3 Typical Reverse Characteristics
IF, INSTANTANEOUS FORWARD CURRENT (A)
IF(AV), AVERAGE FORWARD CURRENT (A)
MBR10200CT / MBRF10200CT
100
10
TA = 175°C
1
TA = 150°C
0.1
TA = 125°C
0.01
TA = 85°C
0.001
0.0001 0
TA = 25°C
0.2 0.4 0.6 0.8
1.0 1.2
VF, INSTANTANEOUS FORWARD VOLTAGE (V) Figure 2 Typical Forward Characteristics
6.0
5.0
4.0
3.0
2.0
1.0
0.0 0
25 50 75 100 125 150 175
TA, AMBIENT TEMPERATURE (°C) Figure 4 Forward Current Derating Curve
IR, INSTANTANEOUS REVERSE CURRENT (mA)
MBR10200CT / MBRF10200CT
Document number: DS36512 Rev. 6 - 2
3 of 5 www.diodes.com
April 2015
© Diodes Incorporated
MBR10200CT / MBRF10200CT
Package Outline Dimensions
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version.
D X
E b2
.