Document
500 mA Positive Voltage Regulators
MC78M00, MC78M00A, NCV78M00 Series
Description The MC78M00/MC78M00A Series positive voltage regulators are
identical to the popular MC7800 Series devices, except that they are specified for only half the output current. Like the MC7800 devices, the MC78M00 three−terminal regulators are intended for local, on−card voltage regulation.
Internal current limiting, thermal shutdown circuitry and safe−area compensation for the internal pass transistor combine to make these devices remarkably rugged under most operating conditions. Maximum output current, with adequate heatsinking is 500 mA.
Features
• No External Components Required • Internal Thermal Overload Protection • Internal Short Circuit Current Limiting • Output Transistor Safe−Area Compensation • MC78M00A High Accuracy (±2%)
Available for 5.0 V, 8.0 V, 12 V and 15 V
• NCV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q100 Qualified and PPAP Capable
• These are Pb−Free Devices
1.0 k 1.0 k
Input 210
520 2.6 k
10 pF
300
3.6 k 6.4 k
6.7
V 16 k
100
1.0 k
200
3.0 k 5.6 k
40 pF 6.0 k
300
50
200
0.24 13
Output
2.0 k
3.9 k
6.0
2.8 k
k
GND
This device contains 28 active transistors. Figure 1. Representative Schematic Diagram
© Semiconductor Components Industries, LLC, 2016
1
November, 2021 − Rev. 29
DATA SHEET www.onsemi.com
4
12 3
DPAK−3 DT SUFFIX CASE 369C
12 3
TO−220 T SUFFIX CASE 221AB
MARKINGDIAGRAMS
xxxxxG ALYWW
MC 78MxxXXT AWLYWWG
Heatsink surface connected to Pin 2. xx = Voltage Option XX = Appropriate Suffix Options A = Assembly Location WL = Wafer Lot Y = Year WW = Work Week G = Pb−Free Package
Heatsink surface (shown as terminal 4 in case outline drawing) is connected to Pin 2.
xxxxx = Device Type and Voltage Option Code A = Assembly Location L = Wafer Lot Y = Year WW = Work Week G = Pb−Free Package
Pin 1. Input 2. Ground 3. Output
ORDERING INFORMATION
See detailed ordering and shipping information in the package dimensions section on page 10−14 of this data sheet.
DEVICE MARKING INFORMATION
See general marking information in the device marking section on page 10 of this data sheet.
Publication Order Number: MC78M00/D
MC78M00, MC78M00A, NCV78M00 Series
MAXIMUM RATINGS (TA = 25°C, unless otherwise noted) (Note 1)
Rating
Symbol
Value
Unit
Input Voltage (5.0 V−18 V) (20 V−24V)
VI
Vdc
35
40
Power Dissipation (Package Limitation) Plastic Package, T Suffix TA = 25°C Thermal Resistance, Junction-to-Air Thermal Resistance, Junction-to-Case
Plastic Package, DT Suffix TA = 25°C Thermal Resistance, Junction-to-Air Thermal Resistance, Junction-to-Case
Operating Junction Temperature Range
PD
Internally Limited
qJA
70
qJC
5.0
PD
Internally Limited
qJA
92
qJC
5.0
TJ
+150
°C/W °C
Storage Temperature Range
Tstg
−65 to +150
°C
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device fu.