Document
Electrically operated valves
Series KM-10, 5/2- and 5/3-way G1/4 • 1500 to 2100 Nl/min (1.524 to 2.134 Cv)
Order code
KM-10-510-HN-442
Series and function
Coil options1)
Standard coil
HN at ports 2 + 4 HN at ports 1, 3 + 5
441 12 V DC, 4,2 W
411
442 24 V DC, 4,2 W
412
452 24 V AC, 7/4 VA
422
456 115 V AC, 7/4 VA
426
457 230 V AC, 7/4 VA
427
461 12 V DC, 2,2 W 2)
431
462 24 V DC, 2,2 W 2)
432
Without coil and plug socket
HN at ports 2 + 4
HN at ports 1, 3 + 5
570
Power consumption 4,2 W, 7/4 VA
500
560 Power consumption 2,2 W 2)
530
Coil with M12 connector and LED
HN at ports 2 + 4
HN at ports 1, 3 + 5
O42 24 V DC, 4,8 W
O12
O62
24 V DC, 2,5 W2)
O32
1) Manual override (HN) is on the side of ports 2 and 4 by default. It can be easily repositioned by 180° (side of ports 1, 3 and 5). Plug socket(s) not included in scope of delivery (see page 4.162).
Design, function and technical data Spool valve actuated by an electrical signal. Please specify required control voltage when ordering.
Valves of this series are available in explosion proof design in accordance with 2014/34/EU (ATEX). For further details see chapter 13 of this catalogue.
KM-10-510-HN, KM-10-511-HN
KM-10-520-HN, KM-10-530-HN, KM-10-533-HN, KM-10-534-HN
4
Note: Plug socket(s) not included in scope of delivery.
1 = pressure inlet 2, 4 = outlets 3, 5 = exhausts
(7) = manual override (detent) can be repositioned by 180h (8) = plug socket can be repositioned by 180h (9) = solenoid coil can be repositioned by 4 x 90h
Order number
Please complete according to order code.
KM-10-510-HN KM-10-511-HN KM-10-520-HN KM-10-530-HN KM-10-533-HN KM-10-534-HN
Function
5/2-way
5/2-way
single solenoid single solenoid
air spring return spring return
5/2-way
5/3-way
double solenoid center position
closed
5/3-way center position exhausted
5/3-way center position pressurized
Connection
G1/4
Nominal size
9 mm
Flow rate
2100 Nl/min (2.134 Cv)
1800 Nl/min (1.830 Cv)
2100 Nl/min (2.134 Cv)
1500 Nl/min (1.524 Cv)
Pressure range
2.5 … 10 bar (36 … 145 psi) 2)
3 … 10 bar (43 … 145 psi) 2)
Response time at 6 bar
on 18 ms off 19 ms
on 16 ms off 27 ms
18 ms
on 16 ms off 22 ms
Temperature range – 10 hC . . . + 70 hC (+ 14 °F … + 158 °F)
Materials
Body: Al (anodized), Seals: NBR, Inner parts: Al, stainless steel and brass
Medium
Compressed air in accordance with ISO 8573-1: 2010, Class 7:2:4 – and free of aggressive additives.
Degree of protection IP 65 according to EN 60529
Weight
0.470 kg (1.034 lbs.)
0.630 kg (1.386 lbs.)
2) max. 8 bar (max. 116 psi) at 2.2 W and 2.5 W.
SubjSeucbt jteocct htoancgheange
44..14651
Electrically operated valves
Accessories and manifolds for series KM-09 and KM-10
Solenoid coils, actuators
Solenoid coils
Actuators Plug sockets
23-SP-011-… 23-SP-012-… 23-SP-011-5-O12 23-SP-012-5-O32
explosion proof
23- R-011 23-R-012
28-ST-01 28-ST-04-… 28-ST-06-… 28-ST-06-K3-…
Standard coil Coil with 2,2 W power consumption Coil with M12 plug connection, 4,8 W, LED and circuit protection Coil with M12 plug connection, 2,5 W, LED and circuit protection Valves with explosion proof actuator see chapter 13
Standard actuator Low power actuator
Standard plug socket Plug socket with LED Plug socket with LED and circuit protection Plug socket with LED, circuit protection and cable
page 4.280 page 4.280 page 4.282 page 4.282
page 4.283 page 4.283 page 4.283 page 4.283
User information Low power consumption coils (2.2 W or 2.5 W) are for pressures up to 8 bar (116 psi) only. Valve actuator 23-R-012 is required. The actuator 23-R-012 is nickel plated. Make sure that the coils with the right power consumption are used. For outdoor applications or in areas with high humidity use coil 23-SP-011-1-… or 23-SP-012-1-… (see page 4.280).
The following types are available on request Coils and sockets with contacts according to DIN EN 175301-803 type B (U-form). Plug sockets with molded cable.
Manifolds for KM-09 and KM-10
Manifold will be delivered completely assembled with valves if requested.
Manifold G1/8 with “n” stations. RF-09/n page 4.124
Manifold G1/4 with “n” stations. RF-10/n page 4.124
End plate for size G1/8 and G1/4. RF-19-E page 4.124
End plate with one valve station G1/8. RF-09-E1 page 4.124
End plate with one valve station G1/4. RF-10-E1 page 4.124
End plate with two valve stations G1/8. RF-09-E2 page 4.124
End plate with two valve stations G1/4. RF-10-E2 page 4.124
One station element G1/8. RF-09-Z1 page 4.124
One station element G1/4. RF-10-Z1 page 4.124
Four station element G1/8. RF-09-Z4 page 4.124
Four station element G1/4. RF-10-Z4 page 4.124
Blind plate for blank valve station G1/8. RF-09-V
Blind plate for blank valve station G1/4. RF-10-V
Seal plate (two different pressures). RF-19-01
Pressure separator. RE-19-DT
Further single elements: RF-19-02 Assembly kit, 2 grub screws, O-rings, studs. RF-19-03 3 x O-rings for valve assembly G1/8 and G1/4.
User inform.