GaAs MMIC
GaAs MMIC
CGY 40
_____________________________________________________________________________________________________...
Description
GaAs MMIC
CGY 40
________________________________________________________________________________________________________
Datasheet
* Single-stage monolithic microwave IC ( MMICamplifier ) * Application range: 100 MHz to 3 GHz * Gain: 9 dB typ. @ 1.6 GHz * Low noise figure: 2.7 dB typ. @ 1.6 GHz * Bandwidth: 3 GHz typ. @ -3 dB, VSWR < 2 : 1 * Operating voltage range: 3 to 5.5 V * Individual current control with neg. gate bias * Hermetically sealed ceramic stripline package Cerec-X
ESD: Electrostatic discharge sensitive device, observe handling precautions! Type Marking Ordering code (tape and reel) Circuit Diagram (Pin Configuration) Package 1)
CGY 40
40
Q68000-A4444
Cerec-X
Maximum ratings Drain-voltage Current control gate voltage Drain-gate voltage Input power Channel temperature Storage temperature range Total power dissipation (TS < 82°C) 2) Thermal resistance Channel-soldering point 2)
Symbol
Value 5.5 -3 ... 0 8.5 16 150 -55...+150 440
Unit V V V dBm °C °C mW
VD VG VDG PIN TCh Tstg Ptot
RthChS
155
K/W
Note: Exceeding any of the max. ratings may cause permanent damage to the device. Appropriate handling is required to protect the electrostatic sensitive MMIC against degradation due to excess voltage or current spikes. Proper ground connection of leads 2 and 4 ( with min. inductance ) is required to achieve the guaranteed RF performance, stable operating conditions and adequate cooling.
1) Dimensions see chapter Package Outlines 2) Ts is measured on the ...
Similar Datasheet