Document 399-1
SMTPowerInductors-LPO3010
• Miniature power inductors – 3 × 3 mm, only 1.0 mm tall • Low DCR; excellent current handling
Designer’s Kit C388 contains 3 of each part Core material Ferrite Terminations RoHS compliant silver-palladium-platinum-glass frit. Other terminations available at additional cost. Weight 20 – 22 mg Ambient temperature –40°C to +85°C with Irms current, +85°C to +125°C with derated current Storage temperature Component: –40°C to +125°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 1.14 mm pocket depth Recommended pick and place nozzle OD: 3 mm; ID: ≤1.5 mm PCB washing Tested with pure water or alcohol only. For other solvents, see Doc787_PCB_Washing.pdf
DCR SRF Inductance2 max3 typ4 Isat5 Irms6 Part number1 (µH) (Ohms) (MHz) (A) (A)
LPO3010-102NL_ 1.0 ±30% 0.140 200 1.7 1.4 LPO3010-122NL_ 1.2 ±30% 0.160 190 1.6 1.4 LPO3010-152NL_ 1.5 ±30% 0.200 150 1.3 1.0 LPO3010-222NL_ 2.2 ±30% 0.265 140 1.2 0.90 LPO3010-332NL_ 3.3 ±30% 0.335 100 0.96 0.60
LPO3010-472NL_ 4.7 ±30% 0.570 LPO3010-682NL_ 6.8 ±30% 0.650 LPO3010-822NL_ 8.2 ±30% 1.00 LPO3010-103ML_ 10 ±20% 1.15 LPO3010-153ML_ 15 ±20% 1.57
80 0.76 0.50 68 0.68 0.47 60 0.64 0.45 50 0.50 0.45 35 0.42 0.40
LPO3010-223ML_ 22 ±20% 2.20 LPO3010-333ML_ 33 ±20% 2.80 LPO3010-473ML_ 47 ±20% 4.60
30 0.37 0.35 14 0.31 0.29 12 0.30 0.28
1. When ordering, please specify termination and packaging codes:
LPO3010-473MLC Termination: L = RoHS compliant silver-palladium-platinum-glass frit
Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (1000 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D = 13″ machine-ready reel. EIA-481 embossed plastic tape (3500 parts per full reel). 2. Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4192A. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using an Agilent/HP 8753ES or equivalent. 5. DC current at which the inductance drops 10% (typ) from its value without current. 6. Current that causes a 40°C temperature rise from 25°C ambient. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
US +1-847-639-6400
[email protected] UK +44-1236-730595
[email protected] Taiwan +886-2-2264 3646
[email protected] China +86-21-6218 8074 .