LPO3010-473MLD

Document 399-1 SMTPowerInductors-LPO3010 Miniature power inductors – 3 × 3 mm, only 1.0 mm tall Low DCR; excellent current handling Designer’s Kit C388 contains 3 of each part Core material Ferrite Terminations  RoHS compliant silver-palladium-platinum-glass frit. Other terminations available at additional cost. Weight  20 – 22 mg Ambient temperature  –40°C to +85°C with Irms current, +85°C to +125°C with derated current Storage temperature  Component: –40°C to +125°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat  Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging  1000/7″ reel; 3500/13″ reel  Plastic tape:  12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 1.14 mm pocket depth Recommended pick and place nozzle  OD: 3 mm;  ID: ≤1.5 mm PCB washing  Tested with pure water or alcohol only. For other solvents, see Doc787_PCB_Washing.pdf DCR SRF   Inductance2   max3   typ4   Isat5   Irms6   Part number1 (µH) (Ohms) (MHz) (A) (A) LPO3010-102NL_  1.0 ±30% 0.140 200 1.7 1.4 LPO3010-122NL_  1.2 ±30% 0.160 190 1.6 1.4 LPO3010-152NL_  1.5 ±30% 0.200 150 1.3 1.0 LPO3010-222NL_  2.2 ±30% 0.265 140 1.2 0.90 LPO3010-332NL_  3.3 ±30% 0.335 100 0.96 0.60 LPO3010-472NL_...