SMT Power Inductors
Document 295 -1
SMTPowerInductors-DO3314
• Only 3.3 mm square, 1.4 mm high! • Handles current up to 1.7 Amps rms
Desi...
Description
Document 295 -1
SMTPowerInductors-DO3314
Only 3.3 mm square, 1.4 mm high! Handles current up to 1.7 Amps rms
Designer’s Kit C358 contains 3 each of all values Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Terminations RoHS compliant silver-palladium-platinum-glass frit. Other terminations available at additional cost. Weight 45.9 – 50.2 mg Ambient temperature –40°C to +85°C with Irms current, +85°C to +125°C with derated current Storage temperature Component: –40°C to +125°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 1.37 mm pocket depth PCB washing Tested with pure water or alcohol only. For other solvents, see Doc787_PCB_Washing.pdf.
Part number1
L2 DCR3 SRF4 ±20% max typ Isat5 Irms6 (µH) (Ohms) (MHz) (A) (A)
DO3314-102ML_ DO3314-152ML_ DO3314-222ML_ DO3314-332ML_ DO3314-472ML_
1.0 0.11 160 2.10 1.70 1.5 0.14 140 2.00 1.40 2.2 0.20 90 1.60 1.30 3.3 0.26 80 1.40 1.20 4.7 0.32 60 1.20 1.10
DO3314-682ML_ 6.8 0.44 DO3314-822ML_ 8.2 0.47 DO3314-...
Similar Datasheet