0805USBN-162MRD

Document 1304-1 Ultra Low Profile Common Mode Choke 0805 For noise suppression in super high speed signal lines: USB 3.x, HDMI 2.0, HDBaseT™, DisplayPort, DVI, etc.; and in high speed differential signal lines: USB 2.0, IEEE1394, LVDS, etc. Up to 6.5 GHz differential mode 3 dB cutoff frequency; up to 35 dB common mode noise attenuation in GHz range Lowest profile 0805 common mode choke – 0.93 mm tall Core material Ferrite Environmental  RoHS compliant Terminations  Matte tin over nickel over silver-platinum-glass frit. Weight  9.0 – 13.0 mg Ambient temperature  –40°C to +125°C with Irms current. ­Maximum part temperature 140°C Storage temperature  Component: –40°C to +155°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat  Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging  2000/7″ reel; 7500/13″ reel;  Plastic tape:  8 mm wide, 0.23 mm thick, 4 mm pocket spacing, 1.07 mm pocket depth PCB washing  Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf. Part number1 Common mode impedance typ (Ohms) 10 MHz 100 MHz 500 MHz Common mode DCR attenuation typ (dB)   Inductance2   max3  Isolation4  Irms5 10 MHz 100 MHz 500 MHz m...