Uniform Sector Flash Memory
A29010B Series
Preliminary
128K X 8 Bit CMOS 5.0 Volt-only, Uniform Sector Flash Memory
Document Title 128K X 8 Bit C...
Description
A29010B Series
Preliminary
128K X 8 Bit CMOS 5.0 Volt-only, Uniform Sector Flash Memory
Document Title 128K X 8 Bit CMOS 5.0 Volt-only, Uniform Sector Flash Memory
Revision History
Rev. No. History
0.0 Initial issue
Issue Date
June 16, 2016
Remark
Preliminary
PRELIMINARY (June, 2016, Version 0.0)
AMIC Technology, Corp.
AMIC reserves the right to change products and specifications discussed herein without notice.
A29010B Series
Preliminary
128K X 8 Bit CMOS 5.0 Volt-only, Uniform Sector Flash Memory
Features
5.0V ± 10% for read and write operations Access times:
- 55ns (max.) Current:
- 20mA typical active read current - 30mA typical program/erase current - 6μA typical CMOS standby Flexible sector architecture - 32 KbyteX4 sectors - Any combination of sectors can be erased - Supports full chip erase - Sector protection:
A hardware method of protecting sectors to prevent any inadvertent program or erase operations within that sector Extended operating temperature range: -40°C~+85°C for –U series Embedded Erase Algorithms - Embedded Erase algorithm will automatically erase the entire chip or any combination of designated sectors and verify the erased sectors
General Description
The A29010B is a 5.0 volt-only Flash memory organized as 131,072 bytes of 8 bits each. The 128 Kbytes of data are further divided into four sectors for flexible sector erase capability. The 8 bits of data appear on I/O0 - I/O7 while the addresses are input on A0 to A16. The A2901...
Similar Datasheet