3A Programmable High-Voltage Ultrasound-Transmit Beamformer
HV7351
8-Channel, ±70V, 3A Programmable High-Voltage Ultrasound-Transmit Beamformer
Features
• Eight Channels with Ret...
Description
HV7351
8-Channel, ±70V, 3A Programmable High-Voltage Ultrasound-Transmit Beamformer
Features
Eight Channels with Return-to-Zero (RTZ) Up to ±70V Output Voltage ±3.0A Output Current Stores up to Four Different Patterns Independent Programmable Delays 80-lead Single 11 x 11 mm VQFN Package
Applications
Medical Ultrasound Imaging NDT, Non-Destructive Testing Arbitrary Pattern Generator High-Speed PIN Diode Driver
Typical Application Circuit
HV7351 8-channel
U1
Tx1 Tx2
tDELAY1 tDELAY2
General Description
The HV7351 device is an 8-channel programmable high-voltage ultrasound-transmit beamformer. Each channel is capable of swinging up to ±70V with an active discharge back to 0V. The outputs can source and sink up to 3.0A to achieve fast output rise and fall times. The active discharge is also capable of sourcing and sinking 3.0A for a fast return to ground. The topology of the HV7351 will significantly reduce the number of I/O logic control lines needed. Each pulser has four associated 64-bit shift registers for storing predetermined transmit patterns and a 10-bit delay counter for controlling the transmit time. One of four arbitrary patterns can be transmitted with adjustable delay, depending on the data loaded into these shift registers and the delay counter. The delay counter can be clocked up to 200 MHz, allowing incremental delays down to 5 ns.
Array Probe
E1
E2
TRIG
HV7351 8-channel
U2
Tx3
tDELAY3
E3
HV7351 8-channel
U16
Tx127 Tx128
TRIG
tD...
Similar Datasheet