DatasheetsPDF.com

MCP16322 Dataheets PDF



Part Number MCP16322
Manufacturers Microchip
Logo Microchip
Description High Efficiency Synchronous Buck Regulator
Datasheet MCP16322 DatasheetMCP16322 Datasheet (PDF)

Obsolete Device For further designs, please refer to the MIC24046 or MCP16311/2 Data Sheets MCP16321/2 24V Input, 1A/2A Output, High Efficiency Synchronous Buck Regulator with Power Good Indication Features • Up to 95% Typical Efficiency • Input Voltage Range: 6.0V to 24V • 1A Output Current (MCP16321) • 2A Output Current (MCP16322) • Fixed Output Voltages: 0.9V, 1.5V, 1.8V, 2.5V, 3.3V, 5V with 2% Output Voltage Accuracy • Adjustable Version Output Voltage Range: 0.9V to 5V with 1.5% Reference.

  MCP16322   MCP16322



Document
Obsolete Device For further designs, please refer to the MIC24046 or MCP16311/2 Data Sheets MCP16321/2 24V Input, 1A/2A Output, High Efficiency Synchronous Buck Regulator with Power Good Indication Features • Up to 95% Typical Efficiency • Input Voltage Range: 6.0V to 24V • 1A Output Current (MCP16321) • 2A Output Current (MCP16322) • Fixed Output Voltages: 0.9V, 1.5V, 1.8V, 2.5V, 3.3V, 5V with 2% Output Voltage Accuracy • Adjustable Version Output Voltage Range: 0.9V to 5V with 1.5% Reference Voltage Accuracy • Integrated N-Channel High-Side Switch: 180 mΩ • Integrated N-Channel Low-Side Switch: 120 mΩ • 1 MHz Fixed Frequency • Low Device Shutdown Current • Peak Current Mode Control • Internal Compensation • Stable with Ceramic Capacitors • Internal Soft-Start • Cycle-by-Cycle Peak Current Limit • Undervoltage Lockout (UVLO): 5.75V • Overtemperature Protection • VOUT Overvoltage Protection • VOUT Voltage Supervisor Reported at the PG Pin • Available Package: QFN-16 (3x3 mm) Applications • PIC®/dsPIC® Microcontroller Bias Supply • 12V Industrial Input DC-DC Conversion • Set-Top Boxes • DSL Cable Modems • Automotive • Wall Cube Regulation • SLA Battery Powered Devices • AC-DC Digital Control Power Source • Power Meters • Consumer • Medical and Health Care • Distributed Power Supplies Description The MCP16321/2 is a highly integrated, high-efficiency, fixed frequency, synchronous step-down DC-DC converter in a 16-pin QFN package that operates from input voltages up to 24V. Integrated features include a high-side and low-side N-Channel switch, fixed frequency Peak Current Mode Control, internal compensation, peak current limit, VOUT overvoltage protection and overtemperature protection. Minimal external components are necessary to develop a complete synchronous step-down DC-DC converter power supply. High converter efficiency is achieved by integrating a high-speed, current limited, low resistance, high-side N-Channel MOSFET, as well as a high-speed, low resistance, low-side N-Channel MOSFET and associated drive circuitry. High switching frequency minimizes the size of the inductor and output capacitor, resulting in a small solution size. The MCP16321/2 device can supply 1A/2A of continuous current while regulating the output voltage from 0.9V to 5V. A high-performance peak current mode architecture keeps the output voltage tightly regulated, even during input voltage steps and output current transient conditions that are common in power supplies. The regulator can be turned on and off with a logic level signal applied to the EN input. The EN input is internally pulled up to a 4.2V reference and is rated for a maximum of 6V. With EN low, typically 5 µA of current is consumed from the input, making the part ideal for power shedding and load distribution applications. The PG output is an open-drain output pin used to interface with other components of the system, and can be pulled up to a maximum of 6V. The output voltage can either be fixed at out.


MCP16321 MCP16322 MCP1632


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)