UART Protocol Converter
MCP2221
USB 2.0 to I2C™/UART Protocol Converter with GPIO
Features:
Universal Serial Bus (USB)
• Supports Full-Speed US...
Description
MCP2221
USB 2.0 to I2C™/UART Protocol Converter with GPIO
Features:
Universal Serial Bus (USB)
Supports Full-Speed USB (12 Mb/s) Implements USB Protocol Composite Device:
- Communication Device Class (CDC) for USB-to-UART Conversion
- Human Interface Device (HID) for I2C™ Device Control and Configuration
128-byte Buffer to Handle Data Throughput at Any Supported UART Baud Rate: - 64-Byte Transmit - 64-Byte Receive
Human Interface Device (HID) for Both I2C Communication and Control: 64-byte Buffer to Handle Data Throughput at Any I2C Baud Rate
Fully-Configurable VID and PID Assignments and String Descriptors
Bus-powered or Self-powered USB 2.0-Compliant: TID# 40001594
USB Driver and Software Support
Enumerates as a Composite USB Device (CDC and HID) Using Standard Drivers for Virtual Com Port (VCP) on the Following Windows® Operating Systems: XP® (SP3), Vista®, 7, 8 and 8.1
Configuration Utility for Establishing a Custom Boot-up Configuration
I2C/SMBus Terminal Windows DLL
CDC and Universal Asynchronous Receiver/Transmitter (UART) Options
Communications Device Class (CDC) for the USB-to-UART Option
Responds to SET LINE CODING Commands to Dynamically Change Baud Rates
Supports Baud Rates: 300-115200 UART TX and RX Pins Only Serial Number Used During the CDC
Enumeration Can Be Enabled By Using the Microchip-provided Configuration Utility or By Calling the Proper API From the Support Libraries for this Device
I2C/SMBus The Device Runs as an I2C...
Similar Datasheet