USB-to-SPI Protocol Converter
MCP2210
USB-to-SPI Protocol Converter with GPIO (Master Mode)
Features:
Universal Serial Bus (USB)
• Supports Full-Spee...
Description
MCP2210
USB-to-SPI Protocol Converter with GPIO (Master Mode)
Features:
Universal Serial Bus (USB)
Supports Full-Speed USB (12 Mb/s) Human Interface Device (HID) device 128-Byte Buffer to Handle Data Throughput:
- 64-byte transmit - 64-byte receive Fully Configurable VID, PID Assignments and String Descriptor (factory programming also available) Bus Powered (factory default) or Self-Powered (can be selected through special USB commands) USB 2.0 Compliant
USB Driver and Software Support
Uses Standard HID Drivers (built-in support on Windows® XP, Vista, 7, Linux and Mac OS®)
Configuration Utility for Device’s Power-up Configuration
Utility for USB-SPI Communication, GPIO Manipulation and Miscellaneous Features Usage
SPI Master Peripheral
Supports all Four SPI modes (Mode 0, 1, 2, 3) Bit Rates from 1500 bps up to 12 Mbps Configurable Delays for SPI Transactions:
- Chip Select (assert) to 1st byte of data delay - Data to data delay - Data to Chip Select (de-assert) delay SPI Transactions Lengths of up to 65535 Bytes Long Up to 9 Chip Select lines – to be used in any combination for a given SPI transaction (the Chip Select lines are shared between GPIOs and alternate function pins; certain GPs – up to 9 of them – can be assigned with the Chip Select functionality)
General Purpose Input/Output (GPIO) Pins
Nine General Purpose I/O Pins
EEPROM 256 Bytes of User EEPROM (accessible through
certain USB commands)
Package Types:
The device will be offered...
Similar Datasheet