UART Protocol Converter
MCP2221A
USB 2.0 to I2C/UART Protocol Converter with GPIO
Note:
The MCP2221A is identical to the MCP2221 in all aspect...
Description
MCP2221A
USB 2.0 to I2C/UART Protocol Converter with GPIO
Note:
The MCP2221A is identical to the MCP2221 in all aspects except for the maximum supported baud rate of the UART, which has been increased from 115200 (MCP2221) to 460800 (MCP2221A).
Features:
Universal Serial Bus (USB)
Supports Full-Speed USB (12 Mb/s) Implements USB Protocol Composite Device:
- Communication Device Class (CDC) for USB-to-UART conversion
- Human Interface Device (HID) for I2C device control and configuration
448-Byte Buffer to Handle Data Throughput at Any Supported UART Baud Rate: - 64-byte transmit - 384-byte receive
Human Interface Device (HID) for Both I2C Communication and Control: 64-byte buffer to handle data throughput at any I2C baud rate
Fully-Configurable VID and PID Assignments and String Descriptors
Bus Powered or Self Powered USB 2.0-Compliant: TID# 40001594
USB Driver and Software Support
Enumerates as a Composite USB Device (CDC and HID) Using Standard Drivers for Virtual Com Port (VCP) on the Following Windows® Operating Systems: XP® (SP3), Vista®, 7, 8, 8.1 and 10
Configuration Utility for Establishing a Custom Boot-Up Configuration
I2C/SMBus Terminal
Windows DLL
CDC and Universal Asynchronous Receiver/Transmitter (UART) Options
Communications Device Class (CDC) for the USB-to-UART Option
Responds to SET LINE CODING Commands to Dynamically Change Baud Rates
Supports Baud Rates: 300-460800 UART TX and RX Pins Only
Serial Number Used During the...
Similar Datasheet