L2293Q
Push-pull four channel driver with diodes
Features
■ 600 mA output current capability per channel ■ 1.2 A peak o...
L2293Q
Push-pull four channel driver with diodes
Features
■ 600 mA output current capability per channel ■ 1.2 A peak output current (non repetitive) per
channel ■ Enable facility ■ Overtemperature protection ■ Logical “0” input voltage up to 1.5 V (high noise
immunity) ■ Internal clamp diodes
Description
The device is a monolithic integrated high voltage, high current four channel driver designed to accept standard DTL or TTL logic levels and drive inductive loads (such as relays solenoides, DC and stepping motors) and switching power
transistors.
VFQFPN 5 mm x 5 mm 32L
To simplify use as two bridges each pair of channels is equipped with an enable input. A separate supply input is provided for the logic, allowing operation at a lower voltage and internal clamp diodes are included.
This device is suitable for use in switching applications at frequencies up to 50 kHz.
The L2293Q is assembled in a VFQFPN-32L 5x5 package which has exposed pad available for heatsinking.
Figure 1. Block diagram
August 2009
Doc ID 14899 Rev 3
1/13
www.st.com
13
Contents
Contents
L2293Q
1 Electrical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.1 Absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1.2 Recommended conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1.3 Thermal data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...