Document
LSL12 thru LSL1B
Surface Mount Schottky Rectifier Reverse Voltage 20~100V Forward Current 1A
Features
• Schottky barrier diodes • Low forward voltage drop • Low leakage current • Moisture sensitivity: level 1, per J-STD-020 • Solder dip 260 °C, 10 s • Low profile, typical thickness 1.0mm • AEC-Q101 qualified
eSGB (SMAF)
Typical Applications
For use of fast swiching in RF module, lighting, cellular phone, portable device, power supplies, and other consumer applications.
Maximum Ratings (TA = 25 °C unless otherwise noted)
Parameter
Symbol LSL12 LSL13 LSL14 LSL15 LSL16 LSL18 LSL1B Unit
Maximum repetitive peak reverse voltage VRRM 20 30 40 50 60 80 100 V
Maximum RMS voltage
VRMS 14 21 28 35 42 56 70 V
Maximum DC blocking voltage
VDC
20
30
40
50
60
80 100
V
Maximum average forward rectified current IF(AV)
1.0
A
Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load
IFSM
30
A
Operating junction and storage temperature TJ,
range
TSTG
- 55 to + 150
°C
Electrical Characteristics (TA = 25 °C unless otherwise noted)
Parameter
Test Conditions Symbol LSL12 LSL13 LSL14 LSL15 LSL16 LSL18 LSL1B Unit
Maximum instantaneous forward voltage
IF=1A, TA=25℃
VF
0.45
0.65 0.80
Maximum DC reverse current at rated DC blocking voltage
TA=25℃ TA=125℃
IR
0.5 30
Typical junction capacitance
4.0 V, 1 MHz
CJ
55
Typical thermal resistance
juntion to lead RθJL1)
30
Note1:Thermal resistance from junction to lead,mounted on PCB with 0.315×0.315〃(8.0×8.0mm)copper pads
Volts mA pF ℃/W
www.goodark.com
1/4
2014.03-Rev.A
LSL12 thru LSL1B
Surface Mount Schottky Rectifier Reverse Voltage 20~100V Forward Current 1A
Ratings and Characteristics Curves
(TA = 25℃ unless otherwise noted)
Figure 1.Forward Current Derating Curve
Figure 2.Maximum Non‐Repetitive Peak Forward Surge Current
Figure 3. Typical Instantaneous Forward Characteristics
Figure 4. Typical Reverse Characteristics
www.goodark.com
2/4
2014.03-Rev.A
LSL12 thru LSL1B
Surface Mount Schottky Rectifier Reverse Voltage 20~100V Forward Current 1A
Package Outline Dimensions
in inches (millimeters)
DIM Unit: mm Unit: inch MIN MAX MIN MAX
A 0.92 1.08 0.036 0.043 A1 0 0.1 0.000 0.004 B 1.25 1.45 0.049 0.057 C 0.1 0.25 0.004 0.010 D 2.6 2.8 0.102 0.110 E 4.1 4.3 0.161 0.169 L 0.7 1.1 0.028 0.043 HE 4.8 5.2 0.189 0.205
Soldering footprint
Packing Information
Packing quantities: 10,000 pcs/Reel,12mm Tape, 13" Reel
Tape & Reel Specification
www.goodark.com
3/4
2014.03-Rev.A
LSL12 thru LSL1B
Surface Mount Schottky Rectifier Reverse Voltage 20~100V Forward Current 1A
Disclaimers
These materials are intended as a reference to assist our customers in the selection of the Suzhou Good-Ark product best suited to the customer’s application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Suzhou Good-Ark Electronics Co., Ltd.or a third party.
Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or infringement of any third-party’s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials.
All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Suzhou Good-Ark Electronics Co., Ltd. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized Suzhou Good-Ark Electronics Co., Ltd. for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Suzhou Good-Ark Electronics Co., Ltd. by various means, including our website home page. (http://www.goodark.com)
When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, Please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein.
The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint or reproduce in whole or in part these materials.
Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further details on these materials or the products contained herein.
www.goodark.com
4/4
2014.03-Rev.A
.