Document
isc Silicon NPN Power Transistor
BUV52A
DESCRIPTION ·High Current Capability ·Low Collector Saturation Voltage-
: VCE(sat)= 0.9V (Max.) @IC= 7A ·High Switching Speed ·Minimum Lot-to-Lot variations for robust device
performance and reliable operation
APPLICATIONS ·Designed for high current, high speed, high power
applications.
Absolute maximum ratings(Ta=25℃)
SYMBOL
PARAMETER
VCEV
Collector-Emitter Voltage (VBE= -1.5V)
VCEO
Collector-Emitter Voltage
VEBO
Emitter-Base Voltage
IC
Collector Current-Continuous
ICM
Collector Current-Peak
IB
Base Current-Continuous
IBM
Base Current-peak
PC
Collector Power Dissipation @TC=25℃
Tj
Junction Temperature
Tstg
Storage Temperature Range
VALUE UNIT
400
V
300
V
7
V
20
A
30
A
4
A
6
A
150
W
150
℃
-65~150 ℃
THERMAL CHARACTERISTICS
SYMBOL
PARAMETER
MAX UNIT
Rth j-c Thermal Resistance,Junction to Case 1.17 ℃/W
isc website:www.iscsemi.com
1 isc & iscsemi is registered trademark
isc Silicon NPN Power Transistor
ELECTRICAL CHARACTERISTICS
TC=25℃ unless otherwise specified
SYMBOL
PARAMETER
CONDITIONS
VCEO(SUS) Collector-Emitter Sustaining Voltage IC= 50mA; IB= 0
V(BR)EBO Emitter-Base Breakdown Voltage
IE= 50mA; IC= 0
VCE(sat) VBE(sat)
ICER ICEV
Collector-Emitter Saturation Voltage
IC= 7A; IB= 0.7A IC= 7A; IB= 0.7A; TC= 100℃
Base-Emitter Saturation Voltage
IC= 7A; IB= 0.7A IC= 7A; IB= 0.7A; TC= 100℃
Collector Cutoff Current
VCE= VCEV; RBE= 10Ω VCE= VCEV; RBE= 10Ω; TC=100℃
Collector Cutoff Current
VCE= VCEV; VBE= -1.5V VCE= VCEV; VBE= -1.5V;TC=100℃
IEBO
Emitter Cutoff Current
VEB= 5V; IC= 0
BUV52A
MIN MAX UNIT
300
V
7
V
0.9 1.9
V
1.3 1.3
V
0.5 2.5
mA
0.5 2.0
mA
1.0 mA
NOTICE: ISC reserves the rights to make changes of the content herein the datasheet at any time without notification. The information contained herein is presented only as a guide for the applications of our products. ISC products are intended for usage in general electronic equipment. The products are not designed for use in equipment which require specialized quality and/or reliability, or in equipment which could have applications in hazardous environments, aerospace industry, or medical field. Please contact us if you intend our products to be used in these special applications. ISC makes no warranty or guarantee regarding the suitability of its products for any particular purpose, nor does ISC assume any liability arising from the application or use of any products, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
isc website:www.iscsemi.com
2 isc & iscsemi is registered trademark
.