Supertex inc.
CL7
Linear, 100mA, Constant Current LED Driver with Enable Input
Features
►►100mA ±5% constant current ...
Supertex inc.
CL7
Linear, 100mA, Constant Current LED Driver with Enable Input
Features
►►100mA ±5% constant current drive ►►Built-in reverse polarity protection ►►Logic level enable ►►Dimmable via EN pin ►►Overtemperature protection ►►90V max rating for transient immunity
Applications
►► Flashlights ►► Specialty lighting ►► Low voltage signage ►► Low voltage lighting
General Description
The CL7 is a linear fixed current
regulator designed for driving high brightness LEDs at 100mA from nominal 12V, 24V, and 48V power supplies. With a maximum rating of 90V, it is able to withstand transients without the need for additional transient protection circuitry. The CL7 is offered in the 8-Lead SOIC package.
An active low enable input (EN) allows logic level control of the LED for on/off control or PWM dimming. The enable input has 100kΩ pull-down resistance. For applications not needing an enable input, refer to the CL6 data sheet.
Over temperature protection shuts off the LED current when the die temperature rises above 135°C (nominal). Full LED current resumes when the die temperature falls below 105°C (nominal).
Typical Application Circuit
VIN
Host
EN
Controller
100mA VDD
OUT
Control
100kΩ
CL7
GND
Doc.# DSFP-CL7 A030314
Supertex inc. www.supertex.com
Ordering Information
Part Number Package Options
CL7SG-G
8-Lead SOIC (w/heat slug)
-G denotes a lead (Pb)-free / RoHS compliant package
Packing 2500/Reel
Absolute Maximum Ratings
Parameter
Value
Supply voltag...