SAW FILTER
NSVS1127 Apr-2013
NewJRC SAW FILTER
NSVS1127
Application 915.0MHz SAW filter
Electrical Specification: (Table 1) The d...
Description
NSVS1127 Apr-2013
NewJRC SAW FILTER
NSVS1127
Application 915.0MHz SAW filter
Electrical Specification: (Table 1) The device characteristics are measured in the circuit shown in Fig.1.
Table 1. Electrical Specifications
Item
Input and Output Impedance
Nominal Center Frequency (f0)
Insertion Loss
902.0~928.0MHz
Response Variation
Input and Output VSWR Out of Band Rejection (Relative toThrough Level)
902.0~928.0(MHz
902.0~928.0MHz DC~800.0MHz
800.0~845.0MHz 845.0~880.0MHz 947.0~992.0MHz 992.0~1020.0MHz 1020.0~1200.0MHz
Spec. -
3.4dB max. 3.6dB max. 1.5dB max. 1.7dB max.
2.5 max. 38dB min. 35dB min. 17dB min. 20dB min. 38dB min. 20dB min.
Typical 50Ω
915MHz
2.8dB
0.8dB
1.8 43dB 40dB 30dB 28dB 43dB 27dB
Condition -
-20~+70ºC -40~+85ºC -20~+70ºC -40~+85ºC
-40~+85ºC
Maximum Rating: (Table 2)
(Operating Temperature Range : -40~+85ºC)
Table2. Maximum Ratings Item Maximum Input Power Maximum DC Voltage Operating Temperature Range Storage Temperature
Rating +10dBm 7.5V -40~+85ºC -40~+85ºC
Mechanical Specifications: (Fig.2) Package is designed as small as 3.0x3.0x1.15[mm3] for SMD (Surface Mount Device) type.
Notice: This part is electrostatic discharge sensitive and may be damaged by improper handling.
http://www.njr.co.jp/products/device/index.html http://www.njr.com/products/device/index.html
(Japanese) (English)
NSVS1127 Apr-2013
IN 50Ω
(a)
16 2 SAW 5 34
Fig.1 Measuring circuit
3. 0±0. 15 ( b)
OUT 50Ω
3. 0 ± 0. 1 5
221
KA
( c) ( 1)
1. 1 5 ± 0. 1 5
( 2)
...
Similar Datasheet