Wide Band GaAs MMIC Amplifier
0.2 - 3.0 GHz
High Gain: 18 dB
Output Power: +14 dBm
Noise Figure: 4 dB
Single Supply: +6 V
Gain Flatness: ± 0.75 dB
Lead-Free 8-lead Ceramic Package
RoHS* Compliant and 260°C Reflow Compatible
M/A-COM’s MAAM02350-A2 is a wide band, MMIC
amplifier housed in a small, lead-free, 8-lead
ceramic package. It includes two integrated gain
stages and employs resistive feedback to obtain flat
gain and a good, 50-ohm, input and output
impedance match over a very wide bandwidth. The
MAAM02350-A2 operates from a single +6 V supply.
It is monolithic, requiring only DC blocking capaci-
tors, no other external components are needed.
The MAAM02350-A2 functions well as a generic IF,
driver or buffer amplifier where high gain, low noise
figure, excellent linearity and low power consumption
are important. Because of its wide bandwidth, the
MAAM02350-A2 can be used in numerous
commercial and government system applications,
such as wireless communications, EW and radar.
The MAAM02350-A2 is manufactured in-house
using a reliable, 0.5-micron, GaAs MESFET
process. This product is 100% RF tested to ensure
compliance to performance specifications.
8-Lead Ceramic (CR-3)
Gull Wing (CR-10)
Pin No. Function
6 RF Output
3 RF Input 7 Ground
1. The package bottom must be connected to RF and DC
Absolute Maximum Ratings 2,3
-55°C to +100°C
-65°C to +150°C
2. Exceeding any one or combination of these limits may cause
permanent damage to this device.
3. M/A-COM does not recommend sustained operation near
these survivability limits.
4. Typical thermal resistance (jc) = +80°C/W
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit: