Dual Half Bridge Driver
NJW4810A
Dual Half Bridge Driver
■ GENERAL DESCRIPTION
The NJW4810A is a general-purpose dual half bridge driver capab...
Description
NJW4810A
Dual Half Bridge Driver
■ GENERAL DESCRIPTION
The NJW4810A is a general-purpose dual half bridge driver capable of supplying 1A current. Output duty=100% can be operated by high side P channel MOSFET. It can use as a full bridge driver by connecting VDD1 and VDD2.
The internal gate driver drives high-side/low-side power MOSFET; therefore, it is able to fast switching.
Additionally, it has protection features such as over current protection and thermal shutdown. And in the case of failure, it can output a fault flag.
It is suitable for power switching applications of DSP/micro controller.
■ FEATURES
Output Switch Current 1A
Operating Voltage
8.0V to 40V
Thermal Shut Down
Over Current Protection
Under Voltage Lockouts
Fault Indicator Output
High Heat Radiation Package
Package Outline
HSOP8
■ PACKAGE OUTLINE NJW4810AGM1
■ PIN CONFIGURATION
18 27 36 45
Exposed PAD on backside connect to GND
1. IN2 2. IN1 3. VDD1 4. OUT1 5. GND 6. OUT2 7. VDD2 8. FLT
Ver.2018-07-24
-1-
NJW4810A
■ BLOCK DIAGRAM
Under Voltage Lock Out
FLT
Thermal Shut Down
Over Current Protection
IN1 Control Logic
IN2
VDD1
VDD2
Level Shift
High Side Gate Driver
Low Side Gate Driver
High Side Gate Driver
Level Shift
Low Side Gate Driver
OUT1 OUT2
GND
-2-
Ver.2018-07-24
NJW4810A
■ ABSOLUTE MAXIMUM RATINGS
(Ta=25°C)
PARAMETER
SYMBOL MAXIMUM RATINGS
UNIT
REMARKS
Supply Voltage
V+1, V+2
45
V
VDD1-GND pin VDD2-GND pin
Input Voltage
VIN
0.3 to 6
V
FLT pin Voltag...
Similar Datasheet