DatasheetsPDF.com

SF58AG Dataheets PDF



Part Number SF58AG
Manufacturers Thinki Semiconductor
Logo Thinki Semiconductor
Description 5.0 Ampere Super Fast Rectifiers
Datasheet SF58AG DatasheetSF58AG Datasheet (PDF)

SF54AG thru SF58AG ® Pb Free Plating Product SF54AG thru SF58AG Pb 5.0 Ampere Super Fast Rectifiers for Power Chargers Features High efficiency, low VF High current capability GPP as-cut wafer for high IFSM High surge current capability Low power loss. For use in low voltage, high frequency inventor, free wheeling, and polarity protection application DO-201AD 1.0(25.4)MIN. Unit: inch(mm) .052(1.3) .048(1.2) .375(9.5) .285(7.2) Mechanical Data Case: Molded plastic Epoxy: UL 94V-0 rate .

  SF58AG   SF58AG


Document
SF54AG thru SF58AG ® Pb Free Plating Product SF54AG thru SF58AG Pb 5.0 Ampere Super Fast Rectifiers for Power Chargers Features High efficiency, low VF High current capability GPP as-cut wafer for high IFSM High surge current capability Low power loss. For use in low voltage, high frequency inventor, free wheeling, and polarity protection application DO-201AD 1.0(25.4)MIN. Unit: inch(mm) .052(1.3) .048(1.2) .375(9.5) .285(7.2) Mechanical Data Case: Molded plastic Epoxy: UL 94V-0 rate flame retardant Lead: Pure tin plated, lead free., solderable per MIL-STD-202, Method 208 guaranteed Polarity: Color band denotes cathode High temperature soldering guaranteed: 260oC/10 seconds/.375”,(9.5mm) lead lengths at 5 lbs., (2.3kg) tension Mounting position: Any Weight: 1.2 gram approximately 1.0(25.4)MIN. .210(5.3) .188(4.8) Maximum Ratings and Electrical Characteristics Rating at 25 oC ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Symbol SF54AG SF56AG SF58AG Units Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current .375 (9.5mm) Lead Length @TA =100oC Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage @ 5.0A Maximum DC Reverse Current @ TA=25 oC at Rated DC Blocking Voltage @ TA=125 oC Maximum Reverse Recovery Time (Note 1) Typical Junction Capacitance (Note 2) Typical Thermal Resistance Operating Temperature Range Storage Temperature Range VRRM VRMS VDC I(AV) IFSM VF IR Trr Cj RθJA RθJL TJ TSTG 200 140 200 0.98 100 400 280 400 5.0 600 420 600 170 1.3 5.0 100 35 50 40 5.0 -65 to +150 -65 to +150 1.7 V V V A A V uA uA nS pF oC/W oC oC Notes: 1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A 2. Measured at 1 MHz and Applied Reverse Voltage of 4.0 V D.C. 3. Mount on Cu-Pad Size 16mm x 16mm on PCB. Rev.02 © 2006 Thinki Semiconductor Co.,Ltd. Page 1/2 http://www.thinkisemi.com/ SF54AG thru SF58AG ® RATING AND CHARACTERISTIC CURVES FORWARD SURGE CURRENT, AMPERES pk (HALF-SING WAVE) AVERAGE FORWARD RECIFIED CURRENT AMPERES 7 6 5 4 3 2 MAXIMUM AVERAGE CURRENT RATING 1 SINGLE PHASE, HALF-WAVE, 60Hz RESISTIVE OR INDUCTIVE LOAD .375" (9mm) LEAD LENGTHS 0 0 20 40 60 80 100 120 140 160 180 AMBIENT TEMPERATURE, OC FIG.1 MAXIMUM AVERAGE FORWARD CURRENT RATING 175 150 125 8.3ms SINGLE HALF SINE-WAVE JEDEC M ETHOD 100 75 50 25 12 5 10 20 50 100 NUMBER OF CYCLES AT 60Hz FIG.2 MAXIMUM NON-REPEITIVE SURGE CURRENT 100 IR - REVERSE LEAKAGE CURRENT. uA 10 1.0 0.1 0.01 T J=125OC TJ=75OC TJ=25OC 0.001 0 2 0 4 0 6 0 80 100 PERCENTAGE OF PEAK REVERSE VOLTAGE,% FIG.3 TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT, AMPERES 10.00 SF54AG SF56AG SF58AG 1.00 0.10 1.00 TA= 25 OC 2.00 3.00 INSTANTANEOUS FORWARD VOLTAGE VOLTS FIG.4 TYPICAL JUNCTION CAPACITANCE Rev.02 © 2006 Thinki Semiconductor Co.,Ltd. Page 2/2 http://www.thinkisemi.com/ .


SF56AG SF58AG YG902C2


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)