TS3V902

TS3V902 3V RAIL TO RAIL CMOS DUAL OPERATIONAL AMPLIFIER (WITH STANDBY POSITION) . DEDICATED TO 3.3V OR BATTERY SUPPLY (specified at 3V and 5V) . RAIL TO RAIL INPUT AND OUTPUT VOLTAGE RANGES . STANDBY POSITION : REDUCED CONSUMPTION (0.5µA) AND HIGH IMPEDANCE OUTPUTS . SINGLE (OR DUAL) SUPPLY OPERATION FROM 2.7V TO 16V . EXTREMELY LOW INPUT BIAS CURRENT : 1pA TYP . SPECIFIED FOR 600Ω AND 100Ω LOADS . LOW SUPPLY CURRENT : 200µA/Ampli . SPICE MACROMODEL INCLUDED IN THIS SPECIFICATION N DIP14 (Plastic Package) D SO14 (Plastic Micropackage) ORDER CODES Part Number TS3V902I/AI Temperature Range -40, +125oC Package ND PIN CONNECTIONS (top view) DESCRIPTION The TS3V902 is a RAIL TO RAIL dual CMOS operational amplifier designed to operate with single or dual supply voltage. The input voltage range Vicm includes the two supply rails VCC+ and VCC-. The output reaches (VCC = 5V) : VCC- +50mV VCC+ -50mV with RL = 10kΩ VCC- +350mV VCC+ -400mV with RL = 600Ω This product offers a broad supply voltage operating range from 2.7V to 16V and a supply current of only 200µA/amp. (VCC = 3V). Source and sink output current capability is typically 40mA (at VCC = 3V), fixed by an internal limitation circuit. The TS3V902 can be put on STANDBY position (only 0.5µA and high impedance outputs). SGS-THOMSON is offering a quad op-amp with the same features : TS3V904. October 1997 Standby 1 Output 1 2 N.C. 3 Inverting Input 1 4 Non-inverting input 1 5 N.C. 6 N.C. 7 + 14 V CC+ 13 Output 2 1...