Document
RS1001FL thru RS1010FL
Surface Mount Glass Passivated Fast Recovery Rectifier Reverse Voltage 50~1000V Forward Current 1A
Features
• Glass passivated Fast Recovery rectifiers • Very low profile - typical height of 1.0 mm • Low forward voltage drop • Low leakage current • Moisture sensitivity: level 1, per J-STD-020 • AEC-Q101 qualified • High temperature soldering guaranteed: 260℃/10 seconds • Halogen-free according to IEC 61249-2-21 definition
eSGA (SOD-123FL)
Typical Applications
For use of general purpose rectification in lighting, cellular phone, portable device, power supplies and other consumer applications.
Maximum Ratings (TA = 25 °C unless otherwise noted)
Parameter
Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current Peak forward surge current 8.3 ms single half sinewave superimposed on rated load Operating junction and storage temperature range
Symbol
RS1001 RS1002 RS1003 RS1004 RS1006 RS1008 RS1010 FL FL FL FL FL FL FL
VRRM 50 100 200 400 600 800 1000
VRMS 35
70 140 280 420 560 700
VDC
50 100 200 400 600 800 1000
IF(AV)
1.0
IFSM
30
TJ, TSTG
- 55 to + 150
Unit
V V V A
A
°C
Electrical Characteristics (TA = 25 °C unless otherwise noted)
Parameter
Test Conditions
Symbol
RS1001 RS1002 RS1003 RS1004 RS1006 RS1008 RS1010 FL FL FL FL FL FL FL
Unit
Maximum instantaneous forward voltage
1A
VF
1.3 Volts
Maximum DC reverse current at rated DC blocking voltage
TA=25℃ TA=125℃
IR
5 50
Maximum reverse recovery time
IF=0.5A,IR=1.0A, Irr=0.25A
trr
150 250 500
Typical junction capacitance
4.0 V, 1 MHz
CJ
8.2
Typical thermal resistance1)
juntion to ambient juntion to case
RθJA RθJC
76 42
juntion to mount
RθJM
7
Note:1),The thermal resistance from junction to ambient,case or mount,mounted on P.C.B with 5×5mm copper pads,2 OZ,FR4 PCB
µA nS pF ℃/W
www.goodark.com
1/4
2014.06-Rev.A
RS1001FL thru RS1010FL
Surface Mount Glass Passivated Fast Recovery Rectifier Reverse Voltage 50~1000V Forward Current 1A
Ratings and Characteristics Curves
(TA = 25℃ unless otherwise noted)
Figure 1.Forward Current Derating Curve
Figure 2.Maximum Non-Repetitive Peak Forward Surge Current
Figure 3. Typical Reverse Characteristics
Figure 4. Typical Junction Capacitance
Figure 5. Typical Instantaneous Forward Characteristics
www.goodark.com
2/4
2014.06-Rev.A
RS1001FL thru RS1010FL
Surface Mount Glass Passivated Fast Recovery Rectifier Reverse Voltage 50~1000V Forward Current 1A
Package Outline Dimensions
DIM Unit: mm
Unit: inch
MIN MAX MIN MAX
A 0.9 1.08 0.035 0.043
A1 0 0.1 0.000 0.004
B 0.85 1.05 0.033 0.041
C 0.1 0.25 0.004 0.010
D 1.7 2 0.067 0.079
E 2.9 3.1 0.114 0.122
L 0.43 0.83 0.017 0.033
HE 3.5 3.9 0.138 0.154
Soldering footprint
Packing Information
Packing quantities: 3000 pcs/Reel, 40 Reels/Box; 8mm Tape, 7" Reel
Tape & Reel Specification
www.goodark.com
3/4
2014.06-Rev.A
RS1001FL thru RS1010FL
Surface Mount Glass Passivated Fast Recovery Rectifier Reverse Voltage 50~1000V Forward Current 1A
Disclaimers
These materials are intended as a reference to assist our customers in the selection of the Suzhou Good-Ark product best suited to the customer’s application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Suzhou Good-Ark Electronics Co., Ltd.or a third party.
Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or infringement of any thirdparty ’ s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials.
All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Suzhou Good-Ark Electronics Co., Ltd. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized Suzhou Good-Ark Electronics Co., Ltd. for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Suzhou Good-Ark Electronics Co., Ltd. by various means, including our website home page. (http://www.goodark.com)
When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, Please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, lia.