RF Digital Step Attenuator
PE4314
Document Category: Product Specification
UltraCMOS® RF Digital Step Attenuator, 1 MHz–2.5 GHz
Features
• Attenua...
Description
PE4314
Document Category: Product Specification
UltraCMOS® RF Digital Step Attenuator, 1 MHz–2.5 GHz
Features
Attenuation step of 0.5 dB up to 31.5 dB Glitch-less attenuation state transitions Low distortion for CATV and multi-carrier applica-
tions Extended +105 °C operating temperature Parallel and Serial programming interfaces Packaging – 20-lead 4 × 4 × 0.85 mm QFN
Applications
DOCSIS 3.1/0 customer premises equipment (CPE) and infrastructure
Satellite CPE and infrastructure Fiber CPE and infrastructure
Figure 1 PE4314 Functional Diagram
Switched Attenuator Array
RF Input
Parallel Control
6-bit
Serial Control
3-bit
Power-up Control
2-bit
Control Logic Interface
RF Output
P/S VSS_EXT (optional)
Product Description
The PE4314 is a 75Ω HaRP™ technology-enhanced, 6-bit RF digital step attenuator (DSA) that supports a frequency range from 1 MHz to 2.5 GHz. It features glitch-less attenuation state transitions and supports 1.8V control voltage and an extended operating temperature range up to +105 °C, making this device ideal for multiple wired broadband applications.
The PE4314 is a pin-compatible upgraded version of the PE4304, PE4307, PE4308 and PE43404. An integrated digital control interface supports both Serial and Parallel programming of the attenuation, including the capability to program an initial attenuation state at power up.
The PE4314 covers a 31.5 dB attenuation range in a 0.5 dB step. It is capable of maintaining 0.5 dB monotonicity th...
Similar Datasheet