Document
1N5391 ........ 1N5399
1.5 Amp. Silicon Rectifier Diodes
Dimensions in mm. DO-15 (Plastic)
Voltage 50 to 1000 V. Current 1.5 A. at 70°C.
6.35 ± 0.2
58.5 min.
• Low cost Mounting instructions 1. Min. distance from body to soldering point, 4 mm. 2. Max. solder temperature, 350°C. 3. Max. soldering time, 3,5 sec. 4. Do not bend lead at a point closer than 2 mm. to the body. • Diffused junction • High current capability • The plastic material carries U/L recognition 94 V-0 • Terminals: Axial Leads • Polarity: Color band denotes cathode
Maximum Ratings, according to IEC publication No. 134
1N 1N 1N 1N 1N 1N 1N 1N 1N 5391 5392 5393 5394 5395 5396 5397 5398 5399
VRRM IF(AV) IFRM IFSM Tj Tstg
Peak recurrent reverse voltage (V) Forward current at Tamb = 70°C Recurrent peak forward current 8.3 ms. peak forward surge current
(Jedec Method)
50
100 200
300
400
500 600
800 1000
1.5 A 10 A 50 A – 65 to + 150 °C – 65 to + 150 °C
Operating temperature range Storage temperature range
Electrical Characteristics at Tamb = 25°C
VF IR Rthj-a Max. forward voltage drop at IF = 1.5 A Max. reverse current at VRRM at 25°C at 150°C Max. thermal resistance (I = 10 mm.) 1.2 V 5µA 300 µ A 60° C/W
1N5390 Characteristic Curves
TYPICAL FORWARD CHARACTERISTIC FORWARD CURRENT DERATING CURVE
10 mm. - 10 mm.
10 1.5 1.2
R or L Load
10
0
0.9 10
-1
C - Load
0.6
Tj = 150°C Tj = 25°C
10
-2
0.3 0
10
-3
0 0 0.6 1.2 1.8 2.4 3.0 3.6 4.2 4.8 5.4
VF ' instantaneous forward voltage (V)
25
50
75 100 125 150 175
Tamb, ambient temperature (°C)
THERMAL RESISTANCE
90 80
MAXIMUM NON REPETITIVE PEAK FORWARD SURGE CURRENT
100
IFM
50 60 20 40
1 cycle
10
20
I
I
4
0 0 10 20 30
I, lead lenght (mm.)
2 1 2 4 10 20 100
Number of cycles at 60 Hz.
.