PWM/PFM Dual Mode Step-up DC/DC Controller
PWM/PFM Dual Mode Step-up DC/DC Controller
AP1624
Features
- Input Voltage Range: 0.9~6V - PWM/PFM Switching Control...
Description
PWM/PFM Dual Mode Step-up DC/DC Controller
AP1624
Features
- Input Voltage Range: 0.9~6V - PWM/PFM Switching Control - High Efficiency: 90% - Oscillator Frequency: 300kHz(±15%) - Stand-by Current: ISTB=3µA.(Typ.) - Pb-Free Package: SOT23-5
Applications
- Electronic Information Organizers - Palmtops - Cellular and portable phones - Portable Audio Systems - Various Multi-function Power Supplies
General Descriptions
The AP1624 is multi-functional step-up DC/DC controllers. Large output current is possible using an externally connected N channel MOSFET, coil, and diode.
Output voltage (VOUT)is programmable with 1.23V of standard voltage supply internal, and using externally connected components, output voltage (FB) can be set up at will.
With a 300KHz switching frequency, the size of the external components can be reduced. Control switches from PFM to PWM during light loads with the AP1624(PFM/PWM switchable)and the series is highly efficient from light loads to large output currents.
During stand-by time (CE pin “Low”), current consumption is reduced to 3µA.
Pin Assignment
Pin Descriptions
(TOP VIEW) EXT GND 54
123 FB VCC CE
SOT23-5
Pin Pin No. Name
Function
1 FB Feedback pin
2 VCC IC Power Supply pin
Chip Enable:
3 CE
H: Enable
L: Disable
4 GND GND pin
5 EXT External N-MOSFET Connection
This datasheet contains new product information. Anachip Corp. reserves the rights to modify the product specification without notice. No liability is assumed as a res...
Similar Datasheet