Voltage Regulator. NCP706B Datasheet

NCP706B Datasheet PDF, Equivalent


Part Number

NCP706B

Description

1% Precision Very Low Dropout Voltage Regulator

Manufacture

ON Semiconductor

Total Page 10 Pages
PDF Download
Download NCP706B Datasheet


NCP706B Datasheet
NCP706B, NCP706AB
1 A, 1% Precision Very Low
Dropout Voltage Regulator
with Enable
The NCP706B/AB are a Very Low Dropout Regulators family
which provides up to 1 A of load current and maintains excellent
output voltage accuracy of 1% including line, load and temperature
variations. The operating input voltage range from 2.4 V up to 5.5 V
makes this device suitable for Li−ion battery powered products as well
as post−regulation applications. The product is available in 3.0 V fixed
output voltage option. NCP706B/AB are fully protected against
overheating and output short circuit and includes latched OCP
protection which automatically latches−off the device in the case of a
short circuit event and the NCP706AB has internal active discharge
circuit.
Very small 8−pin XDFN8 1.6 x 1.2, 04P package makes the device
especially suitable for space constrained portable applications such as
tablets and smartphones. Parts feature active output discharge
function.
Features
Operating Input Voltage Range: 2.4 V to 5.5 V
Fixed Output Voltage Option: 3.0 V
Other Output Voltage Options Available on Request.
Low Quiescent Current of Typ. 200 mA
Very Low Dropout: 155 mV at IOUT = 1 A
±1% Accuracy Over Load/Line/Temperature
High PSRR: 58 dB at 1 kHz
Internal Soft−Start to Limit the Inrush Current
Thermal Shutdown and Current Limit Protections
Stable with a 2.2 mF Ceramic Output Capacitor
Active Output Discharge (NCP706AB)
Available in XDFN8 1.6 x 1.2, 04P 8−pin Package
Latched Overcurrent Protection
These are Pb−Free Devices
Typical Applications
Tablets, Smartphones,
Wireless Handsets, Portable Media Players
Portable Medical Equipment
Other Battery Powered Applications
VIN = 2.4 (3.3) − 5.5 V
CIN
ON
OFF
IN OUT
NCP706B/AB
EN SNS
GND
VOUT = 3.0 V @ 1 A
COUT
2.2 mF
Ceramic
www.onsemi.com
XDFN8
CASE 711AS
MARKING
DIAGRAM
XXMG
G
XX = Specific Device Code
M = Date Code
G = Pb−Free Package
(Note: Microdot may be in either location)
PIN CONNECTION
OUT 1
8 IN
OUT 2
7 IN
N/C 3
6 EN
SNS 4
5 GND
(Top View)
IN 8
1 OUT
IN 7
2 OUT
EN 6
3 N/C
GND 5
4 SNS
(Bottom View)
ORDERING INFORMATION
See detailed ordering, marking and shipping information on
page 9 of this data sheet.
Figure 1. Typical Application Schematic
© Semiconductor Components Industries, LLC, 2016
May, 2016 − Rev. 3
1
Publication Order Number:
NCP706B/D

NCP706B Datasheet
NCP706B, NCP706AB
Figure 2. Simplified Internal Schematic Block Diagram
PIN FUNCTION DESCRIPTION
Pin No.
XDFN8
Pin Name
Description
1
OUT
Regulated output voltage. A minimum 2.2 mF ceramic capacitor is needed from this pin to ground to
assure stability.
2 OUT
3 N/C Not connected. This pin can be tied to ground to improve thermal dissipation.
4
SNS
Remote sense connection. This pin should be connected to the output voltage rail.
5
GND
Power supply ground.
6 EN Enable pin. Driving EN over 0.9 V turns on the regulator. Driving EN below 0.4 V puts the regulator
into shutdown mode. In case of the NCP706B/AB pulling the EN low resets the OCP latch state.
7 IN Input pin. A small capacitor is needed from this pin to ground to assure stability.
8 IN
Exposed
This pad enhances thermal performance and is electrically connected to GND. It is recommended
Pad that the exposed pad is connected to the ground plane on the board or otherwise left open.
www.onsemi.com
2


Features Datasheet pdf NCP706B, NCP706AB 1 A, 1% Precision Ver y Low Dropout Voltage Regulator with En able The NCP706B/AB are a Very Low Dro pout Regulators family which provides u p to 1 A of load current and maintains excellent output voltage accuracy of 1% including line, load and temperature v ariations. The operating input voltage range from 2.4 V up to 5.5 V makes this device suitable for Li−ion battery p owered products as well as post−regul ation applications. The product is avai lable in 3.0 V fixed output voltage opt ion. NCP706B/AB are fully protected aga inst overheating and output short circu it and includes latched OCP protection which automatically latches−off the d evice in the case of a short circuit ev ent and the NCP706AB has internal activ e discharge circuit. Very small 8−pin XDFN8 1.6 x 1.2, 04P package makes the device especially suitable for space c onstrained portable applications such a s tablets and smartphones. Parts featur e active output discharge function. Features • Operating Input Voltage .
Keywords NCP706B, datasheet, pdf, ON Semiconductor, 1%, Precision, Very, Low, Dropout, Voltage, Regulator, CP706B, P706B, 706B, NCP706, NCP70, NCP7, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)