Low-Voltage / Dual Hot-Swap Controllers/Power Sequencers
19-2238; Rev 3; 9/05
EVAALVUAAILTAIOBNLEKIT
Low-Voltage, Dual Hot-Swap Controllers/Power Sequencers
MAX5904–MAX5909
...
Description
19-2238; Rev 3; 9/05
EVAALVUAAILTAIOBNLEKIT
Low-Voltage, Dual Hot-Swap Controllers/Power Sequencers
MAX5904–MAX5909
General Description
Features
The MAX5904–MAX5909 dual hot-swap controllers provide complete protection for dual-supply systems. These devices hot swap two supplies ranging from +1V to +13.2V, provided one supply is at or above 2.7V, allowing the safe insertion and removal of circuit cards into live backplanes.
The discharged filter capacitors of the circuit card provide low impedance to the live backplane. High inrush currents from the backplane to the circuit card can burn up connectors and components, or momentarily collapse the backplane power supply leading to a system reset. The MAX5904 family of hot-swap controllers prevents such problems by gradually ramping up the output voltage and regulating the current to a preset limit when the board is plugged in, allowing the system to stabilize safely. After the startup cycle is completed, two on-chip comparators ...
Similar Datasheet