PF0200

NXP Semiconductors Data Sheet: Technical Data 12 channel configurable power management integrated circuit Document Number: MMPF0200 Rev. 7, 7/2019 PF0200 The PF0200 Power Management Integrated Circuit (PMIC) provides a highly programmable/ configurable architecture, with fully integrated power devices and minimal external components. With up to four buck converters, one boost regulator, six linear regulators, RTC supply, and coin-cell charger, the PF0200 can provide power for a complete system, including applications processors, memory, and system peripherals, in a wide range of applications. With on-chip One Time Programmable (OTP) memory, the PF0200 is available in preprogrammed standard versions, or non-programmed to support custom programming. The PF0200 is especially suited to the i.MX 6SoloLite, i.MX 6Solo and i.MX 6DualLite versions of the i.MX 6 family of devices and is supported by full system level reference designs, and pre-programmed versions of the device. This device is powered by SMARTMOS technology. Features: Three to four buck converters, depending on configuration Boost regulator to 5.0 V output Six general purpose linear regulators Programmable output voltage, sequence, and timing OTP (One Time Programmable) memory for device configuration Coin cell charger and RTC supply DDR termination reference voltage Power control logic with processor interface and event detection I2C control Individually programmable ON, OFF, and Standby modes P...