Crystal Clock Oscillator
ISSUE 1; April 2016
Description
Statek’s high shock, low current LSCHG oscillators, available in tight frequency tolera...
Description
ISSUE 1; April 2016
Description
Statek’s high shock, low current LSCHG oscillators, available in tight frequency tolerances, consist of a Statek miniature quartz crystal and a CMOS/TTL compatible hybrid circuit in a ceramic package. Each crystal used in the LSCHG oscillator is pre-qualified before assembly through electrical tests and characterisation over temperature. SM1 Gold Plated (RoHS) SM5 Solder Dipped (RoHS)
Please note that all data is only valid at 25°C unless otherwise stated.
Frequency Parameters
Frequency
100.0kHz to 200.0kHz
Frequency Tolerance
±100.00ppm
Ageing
+/-3ppm max per year
Please Note: The frequency stability does not include the
calibration tolerance. Positive variations may be small
compared to negative variation.
Supply Voltage Variation: ±3ppm/V max
Load Variation: ±1ppm max ref 10% change in load
Electrical Parameters
Supply Voltage
3.3V ±10%
Please Note: Lower voltages and calibration tolerances tighter than 100ppm many be availible...
Similar Datasheet