DatasheetsPDF.com

DG2503 Dataheets PDF



Part Number DG2503
Manufacturers Vishay
Logo Vishay
Description Quad SPST Analog Switches
Datasheet DG2503 DatasheetDG2503 Datasheet (PDF)

www.vishay.com DG2501, DG2502, DG2503 Vishay Siliconix 200 , Low Leakage, Low Parasitic and Low Charge Injection, Quad SPST Analog Switches DESCRIPTION The DG2501, DG2502, and DG2503 are monolithic quad single-pole single-throw (SPST) analog switches that operate from a single 1.8 V to 5.5 V power supply. These switches are fully specified at 3 V and 5 V. The parts feature low parasitic capacitance, low charge injection, and low leakage performance over the full operating temperature range o.

  DG2503   DG2503



Document
www.vishay.com DG2501, DG2502, DG2503 Vishay Siliconix 200 , Low Leakage, Low Parasitic and Low Charge Injection, Quad SPST Analog Switches DESCRIPTION The DG2501, DG2502, and DG2503 are monolithic quad single-pole single-throw (SPST) analog switches that operate from a single 1.8 V to 5.5 V power supply. These switches are fully specified at 3 V and 5 V. The parts feature low parasitic capacitance, low charge injection, and low leakage performance over the full operating temperature range of -40 °C to +85 °C. Their ESD/HBM tolerance is over 8 kV. The DG2501, DG2502, and DG2503 each feature four independently selectable SPST switches with closely matched channel resistance. The DG2501 is normally closed, while the DG2502 is normally open. The DG2503 has two normally open and two normally closed switches. All parts are guaranteed break-before-make operation for use in multiplexer applications. The parts have a guaranteed control logic high of 1.4 V when V+ is 3 V and 1.8 V when V+ is 5 V. Each switch conducts equally well in both directions when on, and each has an input signal range that extends to the supplies. The DG2501, DG2502, and DG2503 are ideal for portable healthcare, instrument, and communication devices. The DG2501, DG2502, and DG2503 are available in wafer level CSP package with top side lamination. The package has a 4 x 4 bump array, 0.35 mm pitch, and 1.44 mm x 1.44 mm length and width. FEATURES • 1.8 V to 5.5 V single supply operation • Low leakage, 1 nA / max. at 85 °C • Low switch off capacitance • Rail-to-rail signal handling • Latch up current > 800 mA (JESD78) • ESD: 8000 V/HBM • Typical power consumption (< 0.01 μW) • TTL/CMOS compatible • Compact WCSP16 1.44 mm x 1.44 mm • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • Analog front end signal switching • Sample-and-hold circuits • Battery-powered systems • Portable meters • Automatic test equipment • Medical and healthcare equipment • Communication systems FUNCTIONAL BLOCK DIAGRAM Switches are shown for a Logic 0 Input TRUTH TABLE DG2501 LOGIC 0 1 SWITCH ON OFF DG2502 LOGIC 0 1 SWITCH OFF ON LOGIC 0 1 DG2503 SW1, SW4 OFF ON SW2, SW3 ON OFF S17-1317-Rev. B, 21-Aug-17 1 Document Number: 62962 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 www.vishay.com DG2501, DG2502, DG2503 Vishay Siliconix ORDERING INFORMATION PART NUMBER DG2501DB-T2-GE1 DG2501DB-T4-GE1 DG2502DB-T2-GE1 DG2502DB-T4-GE1 DG2503DB-T2-GE1 DG2503DB-T4-GE1 CONFIGURATION Quad SPST Quad SPST Quad SPST Quad SPST Quad SPST Quad SPST PACKAGE OUTLINE SWITCH FUNCTION NC NC NO NO NC/NO NC/NO TEMPERATURE RANGE -40 °C to +85 °C -40 °C to +85 °C -40 °C to +85 °C -40 °C to +85 °C -40 °C to +85 °C -40 °C to +85 °C PACKAGE WCSP16, 1.44 mm x 1.44 m.


DG2502 DG2503 DG2592


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)