LDL112

LDL112 Datasheet 1.2 A low quiescent current LDO with reverse current protection Maturity status link LDL112 Features Input voltage from 1.6 to 5.5 V Very low-dropout voltage (300 mV typ. at 1 A load) Low quiescent current (35 µA typ. at no-load, 1 µA max. in off mode) Output voltage tolerance: ± 2.0% at 25 °C 1.2 A guaranteed output current Wide range of output voltages available on request: 0.8 V to 5 V with 50 mV step and adjustable Logic-controlled electronic shutdown Compatible with ceramic capacitor COUT = 1 µF Internal current and thermal limit Available in DFN6 (2x2), DFN6 (3x3) mm, SO8-batwing and PPAK packages Temperature range: -40 °C to 125 °C Reverse current protection Output discharge function (optional) Applications Consumer Computer Battery-powered systems Low voltage point-of-load USB-powered devices Description The LDL112 is a low-dropout linear regulator, which can provide a maximum current of 1.2 A, with a typical dropout voltage of 300 mV. It is stabilized with a ceramic capacitor on the output. The very low drop voltage, low quiescent current and reverse current protection features make it suitable for low power battery-powered applications. The enable logic control function puts the LDL112 in shutdown mode allowing a total current consumption lower than 1 µA. The device is equipped with current limit and thermal protection. DS10321 - Rev 3 - February 2019 For further information contact your local STMicroelectronic...