LSM6DS33

LSM6DS33 iNEMO inertial module: always-on 3D accelerometer and 3D gyroscope Datasheet - production data LGA-16L (3 x 3 x 0.86 mm) typ. Features  Power consumption: 0.9 mA in combo normal mode and 1.25 mA in combo high-performance mode up to 1.6 kHz.  “Always-on” experience with low power consumption for both accelerometer and gyroscope  Smart FIFO up to 8 kbyte based on features set  Compliant with Android K and L  ±2/±4/±8/±16 g full scale  ±125/±250/±500/±1000/±2000 dps full scale  Analog supply voltage: 1.71 V to 3.6 V  Independent IOs supply (1.62 V)  Compact footprint, 3 mm x 3 mm x 0.86 mm  SPI/I2C serial interface with main processor data synchronization feature  Embedded temperature sensor  ECOPACK®, RoHS and “Green” compliant Applications  Pedometer, step detector and step counter  Significant motion and tilt functions  Indoor navigation  Tap and double-tap detection  IoT and connected devices  Intelligent power saving for handheld devices  Vibration monitoring and compensation  Free-fall detection  6D orientation detection Description The LSM6DS33 is a system-in-package featuring a 3D digital accelerometer and a 3D digital gyroscope performing at 1.25 mA (up to 1.6 kHz ODR) in highperformance mode and enabling always-on low-power features for an optimal motion experience for the consumer. The LSM6DS33 supports main OS requirements, offering real, virtual and batch sensors with 8 kbyte for dynamic data batching. ST’s family of MEMS sensor modu...