1Mbps Avionics CAN Transceiver
October 2015
HI-3000, HI-3001, HI-3002
1Mbps Avionics CAN Transceiver with Low Power Standby Mode
GENERAL DESCRIPTION
...
Description
October 2015
HI-3000, HI-3001, HI-3002
1Mbps Avionics CAN Transceiver with Low Power Standby Mode
GENERAL DESCRIPTION
PIN CONFIGURATIONS (Top Views)
The HI-3000 is a 1 Mbps Controller Area Network (CAN) transceiver optimized for use in aerospace applications. It interfaces between a CAN protocol controller and the physical wires of the bus in a CAN network. Differential output amplitude and current drive capability are specifically enhanced to meet the needs of long cable runs typical of aerospace applications.
The HI-3000 supports two modes of operation: Normal Mode and Standby Mode. The Standby Mode is a very low-current mode which continues to monitor bus activity and allows an external controller to manage wake-up.
Superior common-mode receiver performance makes the device especially suitable for applications where ground reference voltages may vary from point to point over long distances along the CAN bus. In addition, the HI-3000 provides a SPLIT pin to give an output referen...
Similar Datasheet