AD7938-6

Data Sheet FEATURES Throughput rate: 625 kSPS Specified for VDD of 2.7 V to 5.25 V Power consumption 3.6 mW maximum at 625 kSPS with 3 V supplies 7.5 mW maximum at 625 kSPS with 5 V supplies 8 analog input channels with a sequencer Software-configurable analog inputs 8-channel single-ended inputs 4-channel fully differential inputs 4-channel pseudo differential inputs 7-channel pseudo differential inputs Accurate on-chip 2.5 V reference ±0.2% maximum at 25°C, 25 ppm/°C maximum 69 dB SINAD at 50 kHz input frequency No pipeline delays High speed parallel interface with word/byte modes Full shutdown mode: 2 µA maximum 32-lead LFCSP and TQFP packages GENERAL DESCRIPTION The AD7938-6 is a 12-bit, high speed, low power, successive approximation (SAR) analog-to-digital converter (ADC). The part operates from a single 2.7 V to 5.25 V power supply and features throughput rates up to 625 kSPS. The part contains a low noise, wide bandwidth, differential track-and-hold amplifier that can handle input frequencies up to 50 MHz. The AD7938-6 features eight analog input channels with a channel sequencer that allows a preprogrammed selection of channels to be converted sequentially. The part can operate with either single-ended, fully differential, or pseudo differential analog inputs. The conversion process and data acquisition are controlled using standard control inputs that allow easy interfacing with microprocessors and DSPs. The input signal is sampled on the falling edge of CONVST and ...