8Mbit 2.3-3.6V SPI Serial Flash
Obsolete Device
Please use SST25VF080B
SST25PF080B
8 Mbit 2.3-3.6V SPI Serial Flash
Features
• Single Voltage Read and ...
Description
Obsolete Device
Please use SST25VF080B
SST25PF080B
8 Mbit 2.3-3.6V SPI Serial Flash
Features
Single Voltage Read and Write Operations - 2.3-3.6V
Serial Interface Architecture - SPI Compatible: Mode 0 and Mode 3
High Speed Clock Frequency - 80 MHz (2.7-3.6V) - 50 MHz (2.3-2.7V)
Superior Reliability - Endurance: 100,000 Cycles (typical) - Greater than 100 years Data Retention
Low Power Consumption: - Active Read Current: 10 mA (typical) - Standby Current: 5 μA (typical)
Flexible Erase Capability - Uniform 4 KByte sectors - Uniform 32 KByte overlay blocks - Uniform 64 KByte overlay blocks
Fast Erase and Byte-Program: - Chip-Erase Time: 35 ms (typical) - Sector-/Block-Erase Time: 18 ms (typical) - Byte-Program Time: 7 μs (typical)
Auto Address Increment (AAI) Programming - Decrease total chip programming time over Byte-Program operations
End-of-Write Detection - Software polling the BUSY bit in Status Register - Busy Status readout on SO pin in AAI Mo...
Similar Datasheet