Buck Regulator. APW7414 Datasheet

APW7414 Regulator. Datasheet pdf. Equivalent

Part APW7414
Description Synchronous Buck Regulator
Feature APW7414 24V 2A 500kHz synchronous Buck Converter Features General Description • Wide Input Volta.
Manufacture ANPEC
Datasheet
Download APW7414 Datasheet




APW7414
APW7414
24V 2A 500kHz synchronous Buck Converter
Features
General Description
Wide Input Voltage from 4.5V to 24V
2A Continuous Output Current
Adjustable Output Voltage from 0.788V to 13V
Integrated Low Rds(on) MOSFETs
Fixed 500kHz Switching Frequency
Over-Temperature Protection
Current-Limit Protection with HICCUP Mode
Small TSOT-23-8A Package
Lead Free and Green Devices Available
(RoHS Compliant)
APW7414 is a 2A synchronous buck converter with inte-
grated low Rds(on) power MOSFETs. The APW7414 de-
sign with a current-mode control scheme, can convert
wide input voltage of 4.5V to 24V to the output voltage
adjustable from 0.788V to 13V to provide excellent output
voltage regulation.
The APW7414 is also equipped with Under-voltage
lockout, soft-start, over-temperature and current-limit pro-
tection into a single package.
This device, available TSOT-23-8A, provides a very com-
pact system solution external components and PCB area.
Applications
Pin Configuration
LCD Monitor/TV
Set-Top Box
DSL, Switch HUB
Notebook Computer
ISET 1
VIN 2
SW 3
GND 4
8 FB
7 VCC
6 EN
5 BST
APW7414
TSOT-23-8A
Simplified Application Circuit
VIN
4.5V~24V
VIN
BST
VCC
APW7414 SW
ISET
FB
ON
OFF
EN
GND
VOUT
COUT
47µF
ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and
advise customers to obtain the latest version of relevant information to verify before placing orders.
Copyright © ANPEC Electronics Corp.
Rev. A.1 - Aug., 2013
1
www.anpec.com.tw



APW7414
APW7414
Ordering and Marking Information
APW7414
Assembly Material
Handling Code
Temperature Range
Package Code
Package Code
AZ : TSOT-23-8A
Temperature Range
I : -40 to 85 oC
Handling Code
TR : Tape & Reel
Assembly Material
G : Halogen and Lead Free Device
APW7414 AZ :
W14X
X - Date Code
Note: ANPEC lead-free products contain molding compounds/die attach materials and 100% matte tin plate termination finish; which
are fully compliant with RoHS. ANPEC lead-free products meet or exceed the lead-free requirements of IPC/JEDEC J-STD-020D for
MSL classification at lead-free peak reflow temperature. ANPEC defines “Green” to mean lead-free (RoHS compliant) and halogen
free (Br or Cl does not exceed 900ppm by weight in homogeneous material and total of Br and Cl does not exceed 1500ppm by
weight).
Absolute Maximum Ratings (Note 1)
Symbol
Parameter
Rating
Unit
VIN
VSW
VBST-SW
TJ
TSTG
TSDR
VIN Supply to GND Voltage
SW to GND Voltage
BST to SW Voltage
ISET, EN, VCC and FB to GND Voltage
Junction Temperature
Storage Temperature
Maximum Lead Soldering Temperature (10 Seconds)
-0.3 ~ 27
-0.3 ~ 27
-0.3 ~ 6
-0.3 ~ 6
150
-65 ~ 150
260
V
V
V
V
oC
oC
oC
Note1: Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are
stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under "recom-
mended operating conditions" is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device
reliability
Thermal Characteristics
Symbol
θJA
Parameter
Junction-to-Ambient Resistance in Free Air (Note 2)
Typical Value
220
Note 2: θJA is measured with the component mounted on a high effective thermal conductivity test board in free air.
Recommended Operating Conditions (Note 4)
Symbol
VIN
VOUT
IOUT
VIN Supply Voltage
Converter Output Voltage
Converter Output Current
Parameter
Range
4.5 ~ 24
0.788~13
0~2
Unit
oC/W
Unit
V
V
A
Copyright © ANPEC Electronics Corp.
Rev. A.1 - Aug., 2013
2
www.anpec.com.tw







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)