Analog Switches. APL3157 Datasheet

APL3157 Switches. Datasheet pdf. Equivalent

Part APL3157
Description +5.5V Capable DPDT Analog Switches
Feature APL3157 High-Density, +5.5V Capable DPDT Analog Switches Features • – Negative Audio and Video Sig.
Manufacture ANPEC
Datasheet
Download APL3157 Datasheet



APL3157
APL3157
High-Density, +5.5V Capable DPDT Analog Switches
Features
Negative Audio and Video Signal Capable
-0.3V to +5.5V Analog Signal Range Indepen-
dent from VCC
On-Resistance 0.2(typ)
+2.9V to +5.5V Single-Supply Range
Click-and-Pop Suppression
Smooth Switch Transition
Break-Before-Make Operation
Low Supply Current 30µA (typ) at 2.9V
Can be Powered by a GPIO
High-Impedance Mode When VCC Not Applied
ESD Protection on NC_ and NO_
+15kV Human Body Model
WLCSP1.2x1.2-9 (1.2mm x 1.2mm) Package
40oC to +85oC Operating Temperature Range
General Description
The APL3157 is a high-density, double-pole/ double-
throw (DPDT) analog switch which allows signals from -
0.3V to +5.5V to pass without distortion even when the
power supply is below the signal range. The low RON
resistance (0.2) makes the devices ideal for low-dis-
tortion switching, such as audio.
The APL3157 has internal shunt switches that discharge
the audio amplifier AC-coupling capacitance at the nor-
mally open (NO1 and NO2) terminals. This feature re-
duces click-and-pop sounds that occur when switching
audio signals between precharged points.
The switches are fully specified to operate from a single
+2.9V to +5.5V power supply. Because of the low supply
current requirement, VCC can be provided by a GPIO. When
the power is not applied, switches go to a high-imped-
ance mode and all analog signal ports can withstand
signals from -0.3V to +5.5V. The devices control the
switches with a control bit, CB.
The APL3157 is available in a 1.2mm x 1.2mm, 0.4mm
pitch, 9-bump wafer-level package (WLCSP), and oper-
ate over the -4oC to +85oC extended temperature range.
Applications
Smartphones
Tablets
Portable Audio/Video Equipment
Portable Navigation Devices
Pin Configuration
NC1
(A1)
CB
(A2)
NC2
(A3)
COM1
(B1)
GND
(B2)
COM2
(B3)
NO1
(C1)
VCC
(C2)
NO2
(C3)
WLCSP1.2x1.2-9
(Top View)
ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and
advise customers to obtain the latest version of relevant information to verify before placing orders.
Copyright © ANPEC Electronics Corp.
Rev. A.5 - Aug., 2016
1
www.anpec.com.tw



APL3157
APL3157
Ordering and Marking Information
APL3157
Assembly Material
Handling Code
Temperature Range
Package Code
Package Code
HA : WLCSP1.2x1.2-9
Operating Junction Temperature
I : -40 to 85 oC
Handling Code
TR : Tape & Reel
Assembly Material
G : Halogen and Lead Free Device
APL3157 HA:
L7
X
X - Date Code
Note : ANPEC lead-free products contain molding compounds/die attach materials and 100% matte tin plate termination finish; which
are fully compliant with RoHS. ANPEC lead-free products meet or exceed the lead-free requirements of IPC/JEDEC J-STD-020D for
MSL classification at lead-free peak reflow temperature. ANPEC defines Greento mean lead-free (RoHS compliant) and halogen
free (Br or Cl does not exceed 900ppm by weight in homogeneous material and total of Br and Cl does not exceed 1500ppm by
weight).
Absolute Maximum Ratings (Note 1)
Sym bol
Pa ra met er
Rat ing
Unit
VCC, CB
-0.3 to 6
NC1, NC2 , NO1, NO2, COM1 , COM2
VSIG
<20 ns p ulse width
-3 ~V CC+3V
>20 ns p ulse width
- 1~V CC+0.3V
V
IC C (SIG )
IPEAK(SIG)
Co ntinuou s Curre nt NC1, NC2, NO 1, NO 2, COM1, CO M2
Peak Curren t NC1, NC2, NO1 , NO2, COM1, COM2
(50% d uty cycle)
-5 00 to 5 00
-8 50 to 8 50
mA
TJ
TSTG
Ma xim um Junction Tempera tu re
Stor age Temperature Ran ge
15 0
- 6 to 15 0
oC
TS Soldering Temperature Range
26 0
Note1: Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are
stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under "recom-
mended operating conditions" is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device
reliability.
Thermal Characteristics
Symbol
Parameter
Typical Value
θJA
Junction-to-Ambient Thermal Resistance (Note 2)
WLCSP1.2x1.2-9
83
Note 2 : θJA is measured with the component mounted on a high effective thermal conductivity test board in free air.
Recommended Operating Conditions (Note3)
Symbol
Parameter
VCC
Vanalog
TA
TJ
Supply Voltage
Analog Signal Range
Ambient Temperature
Junction Temperature
Note 3 : Refer to the typical application circuit
Range
2.9 ~ 5.5
-0.3 ~ 5.5
-40 ~ 85
-40 ~ 125
Unit
οC/W
Unit
V
V
oC
oC
Copyright © ANPEC Electronics Corp.
Rev. A.5 - Aug., 2016
2
www.anpec.com.tw







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)