V23079

Signal Relays P2 Relay V23079 AXICOM n Standard telecom relay (ringing and test access) n Slim line 15x7.5mm (.590x.295”) n Max. switching current 5A n 2 form C bifurcated contacts (2 changeover contacts, 2 CO) n Immersion cleanable n High sensitivity for low power consumption 140mW/ 70mW n Single coil version with surge voltage resistance between contact and coil: 2.5kV (2/10μs) meets the Telcordia Requirement GR-1089, 1.5kV (10/160μs) meets FCC Part 68 Typical applications Communications equipment linecard application (ringing and test access), PABX, voice over IP, office equipment, measurement and control equipment, automotive equipment as CAN bus, keyless entry, speaker switch, medical equipment, consumer electronics, set top boxes, HiFi Approvals UL 508 File No. E 111441, UL 60950, IEC/EN60950 IEC Ref. Cert. No. 327 Technical data of approved types on request Contact Data Contact arrangement Max. switching voltage Rated current Limiting continuous current, 85°C Switching Power Contact material Contact style Minimum switching voltage Thermoelectrical potential Initial contact resistance Frequency of operation, without load Operate time Set/reset time Release time without diode in parallel with diode in parallel Bounce time Electrical endurance at 12V / 10mA at 6V / 100mA at 60V / 500mA at 30V / 1000mA at 30V / 2000mA at 12V / 5000mA / 25°C Contact ratings, UL Mechanical endurance 2 form C (CO)...