LIN Slave Controller
MLX80104/5
LIN Slave Controller for Switches
Datasheet
28 IO3 27 IO4 26 IO6 25 SW6 24 SW7 23 VS 22 SW8
Features
Appli...
Description
MLX80104/5
LIN Slave Controller for Switches
Datasheet
28 IO3 27 IO4 26 IO6 25 SW6 24 SW7 23 VS 22 SW8
Features
Application Controller GNDA o Internal 12 MHz RC-Oscillator o 16-bit MULAN MCU with 16kB ROM or OTP, 512 Byte RAM, 192 IREF
Byte EEPROM with ECC
SW5
SW4
LIN Protocol Controller according to LIN 2.x and SAE J2602
o Baud rate up to 19.2 kBaud o Frame processing o Low interrupt load to the application
SW3 TO TI1
1 2 3 4 5 6 7
MLX80104/5 QFN 5x5 28
21 AWD 20 SW9 19 IO7 18 IO0 17 GNDD 16 GNDL 15 LIN
TI0 8 IO5 9 IO2 10 SW2 11 SW1 12 SW0 13 IO1 14
LIN Transceiver according to LIN 2.x and SAE J2602
o Slew rate control for best EME behaviour o High EMI immunity
IO Configuration
o 18 fully configurable high current/high voltage inputs/outputs (7mA/26.5V) o Ground shift tolerant I/Os o All IOs configurable pull up or pull down characteristics o Eight PWM outputs (8-bit, 80Hz to 30kHz) o Ten 10-bit ADC channels o Eight Interrupt capable Inputs o Configurable Wake up sources...
Similar Datasheet