USB/UART
1. Features
MDT80P10
USB/UART For UPS
This document specifies the RS232C communication protocol of the Advance-Intelli...
Description
1. Features
MDT80P10
USB/UART For UPS
This document specifies the RS232C communication protocol of the Advance-Intelligent UPS.
USB : Special designed MCU for USB Meet low-speed (1.5Mbps) USB spec Version 1.1 Support 1 device address and 3 endpoints 8-bit data bus
UART : BAUD RATE : 2400bps DATA LENGTH : 8 Bits STOP BIT : 1bit PARITY : NONE
Operating voltage: 4.5V ~ 5.5 V Oscillator frequency: 6 MHz/12MHz Power-on Reset Power edge-detector Reset 4 interrupt sources: -TMR0 timer -USB Endpoint 0 -USB Endpoint 1 -USB Endpoint 2 2 types of oscillator can be selected by programming option: XTAL-Standard crystal oscillator HFXT-High frequency crystal oscillator
This specification are subject to be changed without notice. Any latest information
please preview http;//www.mdtic.com.tw
P. 2
2008/3 Ver. 1.0
2. Pin Assignment
MDT80P10
USB/UART For UPS
Tx 1
18 NC
Rx 2
17 NC
NC 3
16 NC
NC 4
15 NC
NC 5
14 NC
VSS 6
13 D+
NC 7
12 D–
NC 8
11 VDD
OSC1 9
10 OSC2
MDT80P1...
Similar Datasheet